Kenwood TS-2000, TS-2000X, TS-B2000 manual 69

13 MEMORY FEATURES

MEMORY TRANSFER					Channel 00 ~ 289	a	Channel 290 ~ 299
■ Memory \ VFO Transfer
					RX frequency	a	TX/ RX frequency
	After retrieving frequencies and associated data
					TX frequency	a	(simplex)
	from Memory Recall mode, you can copy the data
	to the VFO. This function is useful, for example,
					Mode for RX	a	Mode for TX/ RX
	when the frequency you want to monitor is near
					Mode for TX	a	(simplex)
	the frequency stored in a memory channel.
	1 Recall the desired memory channel.				Offset frequency	a	Offset frequency
	2 Press [MsVFO/ MG.SEL].				Shift direction	a	Shift direction
	• When a simplex channel is recalled, the
					Reverse ON/ OFF	a	Reverse ON/ OFF
	data is copied to VFO A or VFO B,
					RX frequency step	a	TX/ RX frequency
	depending on which VFO was used to recall
	the channel.				TX frequency step	a	step (simplex)
	• When a split channel is recalled, the RX
					Tone frequency	a	Tone frequency
	data is copied to VFO A and the TX data is
					CTCSS frequency	a	CTCSS frequency
	copied to VFO B.
	Note:				DCS code	a	DCS code
	◆ The Memory Channel Lockout status and the subtone
					Tone/ CTCSS/ DCS	a	Tone/ CTCSS/ DCS
	frequency are not copied.
	◆ Pressing [MsVFO/ MG.SEL] after temporarily changing the				ON/ OFF		ON/ OFF
	retrieved data copies the new data to the VFO.				Memory Name	a	Memory Name
■ Channel \ Channel Transfer					Memory Channel	a	Memory Channel
	You can also copy channel information from one				Lockout ON/ OFF		Lockout OFF
	memory channel to another. This function is
	useful when storing frequencies and associated
					Channel 290 ~ 299		Channel 00 ~ 289
	data that you temporarily change in Memory					a
	Recall mode.
					TX/ RX frequency	a	RX frequency
	1 Recall the desired memory channel {page 59}.
						a	TX frequency
	2 Press [M.IN] to enter Memory Scroll mode.
						a	Mode for RX
	• To exit Memory Scroll mode, press [CLR].				Mode for TX/ RX
						a	Mode for TX
	3 Select the memory channel where you would
					Offset frequency	a	Offset frequency
	like the data copied, using the MULTI/ CH
	control.
					Shift direction	a	Shift direction
	4 Press [M.IN] again.
					Reverse ON/ OFF	a	Reverse ON/ OFF
						a	RX frequency step
	Channel 00 ~ 289	a		Channel 00 ~ 289	TX/ RX frequency
					step (simplex)	a	TX frequency step
	RX frequency	a		RX frequency
					Tone frequency	a	Tone frequency
	TX frequency	a		TX frequency
					CTCSS frequency	a	CTCSS frequency
	Mode for RX	a		Mode for RX
					DCS code	a	DCS code
	Mode for TX	a		Mode for TX
					Tone/ CTCSS/ DCS	a	Tone/ CTCSS/ DCS
	Offset frequency	a		Offset frequency
					ON/ OFF		ON/ OFF
	Shift direction	a		Shift direction
					Memory Name	a	Memory Name
	Reverse ON/ OFF			Reverse ON/ OFF
		a			Memory Channel	a	Memory Channel
					Lockout ON/ OFF		Lockout OFF
	RX frequency step	a		RX frequency step
					When copying a memory channel 290 ~ 299 a
	TX frequency step	a		TX frequency step
					channel 290 ~ 299, Memory Channel Lockout
	Tone frequency	a		Tone frequency
					status changes to OFF, regardless of the original
	CTCSS frequency	a		CTCSS frequency	channel settings.
					The tables above illustrate how data is transferred
	DCS code	a		DCS code
					between memory channels.
	Tone/ CTCSS/ DCS	a	Tone/ CTCSS/ DCS
	ON/ OFF			ON/ OFF
	Memory Name	a		Memory Name
	Memory Channel	a		Memory Channel
	Lockout ON/ OFF			Lockout OFF

61