THANK YOU
THANK YOU
Thank you for choosing this KENWOOD
This transceiver features dual Digital Signal Processing (DSP) units to process IF and AF signals. By taking maximum advantage of DSP technology, the
Though user friendly, this transceiver is technically sophisticated and some features may be new to you. Consider this manual to be a personal tutorial from the designers. Allow the manual to guide you through the learning process now, then act as a reference in the coming years.
FEATURES
•All mode operation from HF to 1.2 GHz
•Dual high speed Digital Signal Processing (DSP) units.
•Adjustable DSP filter frequencies.
•High speed Digital Automatic Gain Control (AGC).
•A second independent
•A
•A
•DX Packet Cluster Tune (P.C.T.) for DX hunting.
•Instant Satellite communication key.
•A razor sharp DSP filter up to 50 Hz for CW operation.
SUPPLIED ACCESSORIES
After carefully unpacking the transceiver, identify the items listed in the table. We recommend you keep the box and packing material below in case you need to repack the transceiver in the future.
|
| Quantity | ||
Accessory | Part Number |
|
| |
|
| |||
|
| |||
Microphone | 1 | 1 | ||
|
|
|
| |
DC power cable | 1 | 1 | ||
|
|
|
| |
1 | 1 | |||
|
|
|
| |
1 | 1 | |||
|
|
|
| |
1 | 1 | |||
|
|
|
| |
Fuse (25 A) | 1 | 1 | ||
|
|
|
| |
Fuse (4 A) | 1 | 1 | ||
|
|
|
| |
Screw Set | 1 | 1 | ||
|
|
|
| |
Spacer for | 4 | 4 | ||
|
|
|
| |
Line filter1 | 1 | 1 | ||
Retaining Band1 | 1 | 1 | ||
– | 1 | |||
|
|
|
| |
Instruction Manual | 1 | 1 | ||
|
|
|
| |
Schematic/ Block |
|
| ||
1 | 1 | |||
Diagrams | ||||
|
| |||
|
|
| ||
|
|
| ||
|
|
|
| |
|
|
| ||
Warranty card | 1 | 1 | ||
|
|
| ||
| (All |
|
| |
|
|
|
|
1E and
WRITING CONVENTIONS FOLLOWED
The writing conventions described below have been followed to simplify instructions and avoid unnecessary repetition.
Instruction |
|
| What to Do | |||
|
|
|
|
|
| |
Press [KEY]. | Press and release KEY. | |||||
|
|
|
|
|
| |
|
|
| Press and hold KEY1 down, | |||
Press | then press KEY2. If there are | |||||
more than two keys, press and | ||||||
[KEY1]+[KEY2]. | ||||||
hold down each key in turn until | ||||||
|
|
| ||||
|
|
| the final key has been pressed. | |||
|
|
|
|
|
| |
Press | Press KEY1 momentarily, | |||||
[KEY1], [KEY2]. | release KEY1, then press KEY2. | |||||
|
|
| With the transceiver power OFF, | |||
Press | press and hold KEY, then switch | |||||
[KEY]+[ |
| ]. | ON the transceiver power by | |||
| ||||||
| ||||||
|
|
| pressing [ |
| ] (POWER). | |
|
|
|
|
i