Setting up the system
Digital connections
The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or standard PCM (CD)
format digital signals. |
|
If you have connected any digital components to the receiver, be sure to read the “Input mode settings” section carefully. | 8 |
COAXIAL | OPTICAL | OPTICAL |
| CD/DVD | VIDEO 3 |
VIDEO
2
DVD/
6CH
DIGITAL IN
COAXIAL DIGITAL OUT (AUDIO)
RF digital demodulator (Commercially available)
Optical fiber cable
Optical fiber cable
OPTICAL DIGITAL OUT (AUDIO)
OPTICAL DIGITAL OUT (AUDIO)
COAXIAL DIGITAL OUT (AUDIO)
DOLBY DIGITAL RF OUT (AUDIO)
PCM OUT
Component with DTS,
Dolby Digital, or PCM
OPTICAL DIGITAL OUT
Connect the video signal and digital audio signals to the VIDEO 3 jacks. (See “Connecting video compo-
nents”.)@
DVD Player or CD Player
Component with DTS,
Dolby Digital, or PCM
COAXIAL DIGITAL OUT
Connect the video signal and analog audio signals to the VIDEO 2 jacks. (See “Connecting video compo-
nents”.)@
LD Player
To connect an LD player with a DIGITAL RF OUT, connect the LD player to the RF digital demodulator (Commercially available). Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver.
Connect the video signal and analog audio signals to the VIDEO 2 or VIDEO 3 jacks. (See “Connecting video components”.)