Preparing for surround sound
6Input the distance to the speakers.
•Indicators appear only for the channels of the speakers selected in step 3.
1Press the ∧/∨ keys or MULTI @/# keys to select the SP
DISTANCE on setup displays and press the SETUP key again.
2Measure the distance from the listening position to each of the speakers.
Jot down the distance to each of the speakers.
Distance to Front Left Speaker (L) | : | ____ feet (meters) |
Distance to Center Speaker (C) | : | ____ feet (meters) |
Distance to Front Right Speaker (R) | : | ____ feet (meters) |
Distance to Surround Right (SR) | : | ____ feet (meters) |
Distance to Surround Back Right (SBR) : ____ feet (meters)
Distance to Surround Back (SB) | : | ____ feet (meters) |
Distance to Surround Back Left (SBL) | : | ____ feet (meters) |
Distance to Surround Left (SL) | : | ____ feet (meters) |
Distance to Subwoofer (SW) | : | ____ feet (meters) |
•If you have selected “SB NORMALx1” or ”SB LARGEx1”, “SBR” and “SBL” are not appeared but “SB” is appeared on the Display.
3Use the ∧/∨ keys or MULTI @/# keys to select the speakers and the MULTI CONTROL knob or MULTI %/fi keys to adjust the distance to the Front Speakers.
The speaker indicator to be adjusted blinks.
|
| SP | MUTE | STEREO |
L | C SW R | A B | CLIP |
|
|
|
|
LFE
8Select the display mode.
1Press the ∧/∨ keys or MULTI @/# keys to select the DISP
MODE.
2Use the MULTI CONTROL knob or MULTI %/fi keys to select the display mode.
1DISP SELECTOR : Displays the current input selector.
2 DISP LISTEN | : Displays the current listen mode. | |||
|
| SP | MUTE | STEREO |
L | R | A B | CLIP |
|
|
|
|
3Press the SETUP key again to accept the setting.
4Use the ∧ key or MULTI # key to select EXIT.
|
| SP | MUTE | STEREO |
L | R | A B | CLIP |
|
|
|
|
SL S SB SR
5Press the SETUP key to exit the SETUP mode.
SL S SB SR
Indication in feet | Indication in meters |
•The allowable setting range is 1 to 30 feet (0.3 to 9.0 m), adjustable in 1 foot (0.3 m) increments.
4Repeat steps 3 to input the distance for each of the speakers.
5Press the SETUP key again to return to main setup displays.
•The speakers you have selected should appear on the display. Confirm that all the speakers have been correctly selected.
7Adjust the LFE LEVEL (Low Frequency Effects).
1Press the ∧/∨ keys or MULTI @/#keys to select the LFE
LEVEL.
2Use the MULTI CONTROL knob or MULTI %/fi keys to adjust the LFE LEVEL.
|
| SP | MUTE | STEREO |
L | R | A B | CLIP |
|
|
|
|
• The LFE LEVEL can be adjusted from 0dB to
3Press the SETUP key again to return to main setup displays.