Preparing for surround sound
8Use the MULTI CONTROL knob or MULTI %/fi to select the appropriate Surround Speaker setting.
If you selected “FRNT LARGE” as the Front Speaker setting,
1 | SURR NORMAL | : Average size Surround Speakers are con- |
|
| nected to the receiver. |
2 | SURR LARGE | : Large size Surround Speakers are con- |
|
| nected to the receiver. |
3 | SURR OFF | : Surround Speaker setting mode to the |
|
| receiver is OFF. |
If you selected “FRNT NORMAL” as the Front Speaker setting,
1SURR NORMAL : Average size Surround speakers are connected to the receiver.
2 SURR OFF | : Surround speaker setting mode to the |
| receiver is OFF. |
•When the setting “SURR OFF” is selected, the procedure skips to step !.
9Press the ∧ key or MULTI # keys again to accept the setting.
• The Surround Back Speaker setting indication “SB” appears.
0Use the MULTI CONTROL knob or MULTI %/fi keys to select appropriate Surround Back Speaker setting.
If you selected “SURR LARGE” as the Surround Speaker setting,
1SB NORMALx1 : A single average size Surround Back Speaker is connected to the receiver.
2 | SB NORMALx2 : A pair of average size Surround Back Speak- | ||||
|
|
|
|
| ers are connected to the receiver. |
3 | SB LARGEx1 | : A single large size Surround Back Speaker | |||
|
|
|
|
| is connected to the receiver. |
4 | SB LARGEx2 | : A pair of large size Surround Back Speak- | |||
|
|
|
|
| ers are connected to the receiver. |
5 | SB OFF |
| : Surround Back Speaker setting mode to | ||
|
|
|
|
| the receiver is OFF. |
|
|
| SP | MUTE | STEREO |
L | C | SW R | A B | CLIP |
|
|
|
| |||
| LFE |
|
|
|
|
SL S SB | SR |
|
|
|
4Select the CROSSOVER frequency.
CROSSOVER function is to adjust the receiver’s audio output characteristics with the speakers’ characteristics which differs depending on the size of the speakers. You will be able to enjoy a more natural and dynamic sound experience even with small size speakers.
1Press the ∧/∨ keys or MULTI @/# keys to select the CROSS-
OVER and press the SETUP key.
2Use the MULTI CONTROL knob or MULTI %/fi keys to select the CROSSOVER frequency.
1 FREQ. : 40Hz
2 FREQ. : 60Hz
3 FREQ. : 80Hz
4 FREQ. : 100Hz
5 FREQ. : 120Hz
6 FREQ. : 150Hz
|
| SP | MUTE | STEREO |
L | R | A B | CLIP |
|
|
|
|
• CROSSOVER function will not be available when “LARGE” is selected for all the speakers and “SW
3Press the SETUP key again to return to the main setup displays.
5Adjust the speaker volume level.
From your usual listening position, adjust the volume levels. The volume levels from each speaker should be the same.
•The receiver enters the speaker volume level adjustment mode.
•Indicators appear only for the channels of the speakers selected in step 3.
1Press the ∧/∨ keys or MULTI @/#keys to select the TEST TONE.
2Press the SETUP key for the following displays:
1 T.TONE AUTO
2 T.TONE MANUAL
If you selected “SURR NORMAL” as the Surround Speaker setting,
1SB NORMALx1 : A single average size Surround Back Speaker is connected to the receiver.
2 | SB NORMALx2 : A pair of average size Surround Back Speak- | |
|
| ers are connected to the receiver. |
3 | SB OFF | : Surround Back Speaker setting mode to |
|
| the receiver is OFF. |
!Press the ∧ key or MULTI # key again to accept the setting.
•The Subwoofer remix setting indication “SW
@Use the MULTI CONTROL knob or MULTI %/fi keys to select the appropriate Subwoofer
1SW
3The selection of AUTO/MANUAL TEST TONE is done by the MULTI CONTROL knob or MULTI %/fi keys.
Press the SETUP key again to begin TEST TONE.
Use the MULTI CONTROL knob or MULTI %/fi keys to adjust the volume level of the test tone output from the speaker channel to be adjusted.
For AUTO selection, the test tone is heard from the speakers in the following sequence for 2 seconds each starting from the Front Left speaker.
LEFTCNTR RIGHTSR
SUBW SL SBL SBR
•If you have selected “SB NORMALx1” or ”SB LARGEx1”, “SBR” and “SBL” are not appeared but “SB” is appeared on the Display.
The channel indication blinks while the test tone is being output.
2SW
L C SW R
LFE
SP MUTE
A B CLIP
•If Subwoofer is turned off or “FRNT NORMAL” is selected at the Front Speaker setting, Subwoofer
#Press the SETUP key again to return to the main setup displays.
SL SB SR
•If the speaker setting selects are OFF, the speaker level settings are reset.
For MANUAL selection, press the ∧/∨ keys or MULTI @/# keys each time to select the speaker channel.
4Press the SETUP key again.
• The test tone is turned off and return to the main setup displays.