Specifications

Caution : Read this page carefully to ensure safe operation.

AUDIO section

Rated power output during STEREO operation

100 watts per channel minimum RMS, both channels driven, at 8 Ω from 20 Hz to 20 kHz with no more than 0.09% total harmonic distortion. (FTC)

Effective power output during SURROUND operation

FRONT (20 ~ 20 kHz, 0.09 % T.H.D., at 8 Ω one channel driven)

............................................................................... 100 W + 100 W

CENTER (20 ~ 20 kHz, 0.09 % T.H.D., at 8 Ω one channel driven)

.............................................................................................. 100 W

SURROUND (20 ~ 20 kHz, 0.7 % T.H.D., at 8 Ω one channel

driven) ...................................................................

100 W + 100 W

SURROUND BACK (20 ~ 20 kHz, 0.7 % T.H.D., at 8 Ω one channel

driven) ...................................................................

100 W + 100 W

Total harmonic distortion .......................

0.009 % (1 kHz, 50 W, 8 Ω)

Frequency response

 

CD/DVD ..................................

10 Hz ~ 100 kHz, +0 dB ~ –3.0 dB

PHONO ‘RIAA’ response ..............

40 Hz ~ 20 kHz, +1.5 dB ~ –3.0 dB

Maximum input level

 

PHONO (MM) ..................................

40 mV, 1 % T.H.D., at 1 kHz

Signal to noise ratio (IHF’66)

 

PHONO (MM) ........................................................................

75 dB

CD/DVD .................................................................................

95 dB

Input sensitivity / impedance

 

PHONO (MM) ...........................................................

7 mV / 47 kΩ

CD/DVD, MD/TAPE, AV AUX, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH

Output..............................................................................level / impedance

500 mV / 47 kΩ

 

MD/TAPE REC .......................................................

500 mV / 1 kΩ

PRE OUT (SUBWOOFER) .............................................

1 V / 1 kΩ

Tone control

 

BASS ................................................................

±10 dB (at 100 Hz)

TREBLE ............................................................

±10 dB (at 10 kHz)

Loudness control

 

VOLUME at –30 dB level ......................................

+6 dB (100 Hz)

DIGITAL AUDIO section

Sampling frequency

...................... 32 kHz, 44.1 kHz, 48 kHz, 96 kHz

Input level / impedance / wave length

Optical ...........................

(–15 dBm ~ –24 dBm), 660 nm ±30 nm

Coaxial ...................................................................

0.5 Vp-p / 75 Ω

VIDEO section

VIDEO inputs / outputs

 

 

VIDEO (composite) ..................................................

1

Vp-p / 75 Ω

S VIDEO inputs /outputs

 

 

S VIDEO (luminance signal) ...................................

1

Vp-p / 75 Ω

S VIDEO (chrominance signal) .......................

0.286

Vp-p / 75 Ω

COMPONENT VIDEO inputs /outputs

 

 

COMPONENT VIDEO (luminance signal) ..............

1

Vp-p / 75 Ω

COMPONENT VIDEO (CB/CR-signal) ...............

0.64

Vp-p / 75 Ω

FM tuner section

Tuning frequency range .................................

87.5 MHz ~ 108.0 MHz

Usable sensitivity (MONO)

 

 

........................... 1.3 µV (75 Ω)/ 13.2 dBf (75 kHz dev, SINAD 30 dB)

50 dB quieting sensitivity

 

 

STEREO ..............................

28 µV (75 Ω)/ 40.2 dBf (75 kHz dev)

Total harmonic distortion

 

 

MONO (1 kHz, 75 kHz dev)

..........................

0.5% (65 dBf input)

STEREO (1 kHz, 67.5 + 6.75 kHz dev) .........

0.7% (65 dBf input)

Signal to noise ratio

 

 

MONO (1 kHz, 75 kHz dev)

........................

75 dB (65 dBf input)

STEREO (1 kHz, 67.5 + 6.75 kHz dev) .......

68 dB (65 dBf input)

Stereo separation (1 kHz) ...........................................................

40 dB

Selectivity (±400 kHz) .................................................................

70 dB

Frequency response (30 Hz ~ 15 kHz) ....................

+0.5 dB, –3.0 dB

AM tuner section

Tuning frequency range

...................................................................... 530 kHz ~ 1,700 kHz

Usable sensitivity (30% mod, S/N 20 dB)

................................................................................ 16 µV / (600 µV/m)

Signal to noise ratio (30% mod, 400 Hz)

.................................................................. 50 dB (60 dBµV EMF input)

GENERAL

Power consumption ...................................................................

 

3.4 A

Standby Power consumption .....................................

 

Less than 1 W

AC outlet

 

 

 

SWITCHED .........................................

(total 150 W, 1.25 A max.)

Dimensions .....................................................

W : 440

mm (17-5/16")

 

H

: 159

mm (6-1/4")

 

D

: 392

mm (15-7/16")

Weight (Net) ............................................................

11.7 kg (25.8 lb)

Notes

1.KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.

2.The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).

For your records

Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product.

Model __________________ Serial Number ________________________

36 EN