Normal playback

One-touch low frequency emphasis (BASS BOOST)

You can adjust the sound quality when the receiver is in the PCM stereo and analog stereo modes.

Press the BASS BOOST key.

•Press the key once to select the maximum (+10) low frequency emphasis setting.

•This key does not function when the receiver is in the sound quality or ambience effects adjustment mode.

•This function is available only for speakers connected to FRONT A terminals.

Switching back to the previous setting

Press the BASS BOOST key again.

Muting the sound

The MUTE key lets you mute the sound of the speakers.

Press the MUTE key.

 

 

 

 

Blinks

 

 

 

SP

MUTE

L

C

R

A B

CLIP

 

 

 

LFE

 

 

 

SL S

SB

SR

 

 

To cancel

Press the MUTE key again so that the “MUTE” indicator goes off.

•MUTE ON can also be deactivated by turning the VOLUME CON- TROL knob or pressing VOLUME %/fi keys.

ACTIVE EQ mode

You can enjoy a more impressive sound effect when ACTIVE EQ is turned ON.

Press the ACTIVE EQ key for the following selections;

1 ACTIVE EQ MUSIC : Effective when listening to music. (The ACTIVE EQ indicator lights up.)

2ACTIVE EQ CINEMA : Effective when watching movie. (The ACTIVE EQ indicator lights up.)

3

ACTIVE EQ GAME

: Effective when playing video game.

 

 

(The ACTIVE EQ indicator lights up.)

4

ACTIVE EQ OFF

: The ACTIVE EQ function is turned OFF.

 

 

(The ACTIVE EQ indicator goes off.)

• “ACTIVE EQ” will scroll from right to left.

• ACTIVE EQ function will not be available when in REC MODE, or when searching or presetting radio stations.

Listening with headphones

1Connect headphones to the PHONES jack.

PHONES

• The sounds from all speakers are cut off.

2Use the VOLUME CONTROL knob or VOLUME %/fi keys to adjust the volume.

Recording

Recording audio (analog sources)

Input Selector keys

Input Selector keys

Recording a music source

1Use the Input Selector keys to select the source (other than “MD/ TAPE”) you want to record.

2Set the MD or TAPE recorder to record.

3Start playback, then start recording.

Recording video

1Use the Input selector keys to select the video source (other than “VIDEO 1”) you want to record.

2Set the video recorder connected to VIDEO 1 to record.

• Select the REC MODE to record a digital input source.

3Start playback, then start recording.

• Recording may not be normal for some video software. This is due

to the copy guard condition.

›

22 EN