Normal playback
Input level adjustment (analog sources only) | Adjusting the sound | |
|
| BASS BOOST LOUDNESS |
MULTI CONTROL
TONE MULTI CONTROL
Input SOUND | PHONES ACTIVE EQ | MUTE VOLUME | |
| CONTROL | ||
Selector |
| ||
keys |
| TONE | |
SOUND |
| ||
|
| ||
MULTI %/ fi, |
| MULTI %/fi | |
@/# |
| ||
|
| VOLUME %/fi | |
|
| MUTE | |
Input Selector |
| ACTIVE EQ | |
keys | BASS BOOST | ||
LOUDNESS | |||
|
|
Input level adjustment (analog sources only)
If the input level of an analog source signal is too high, the CLIP indicator will blink to indicate the source signal. Adjust the input level.
Adjusting the TONE
You can adjust the sound quality when the receiver is in the PCM stereo and analog stereo mode.
1Press the TONE key to select the TONE mode.
L C R
LFE
SP MUTE
A B CLIP
2Use the MULTI CONTROL knob or MULTI %/fi keys to select
TONE ON/OFF.
SL S SB SR
1Use the Input Selector keys to select the source of which the input level you want to adjust.
• You can store a separate input level for each input source.
2Press the SOUND and ∧/∨ keys or MULTI @/# keys repeatedly until the “INPUT” indication appears.
3Use the MULTI CONTROL knob or MULTI %/fi keys to adjust the input level.
|
|
| SP | MUTE |
|
L | C | R | A B | CLIP | DOLBY PL II x |
|
| ||||
| LFE |
|
|
|
|
SL S | SB | SR |
|
|
|
•The adjustment mode is displayed for approximately 20 seconds.
•The input level may be adjusted to any one of three settings: 0dB,
4Press the SOUND key again to return to the input indication.
|
|
| SP | MUTE | STEREO |
L | C | R | A B | CLIP |
|
|
|
|
LFE
SL S SB SR
3When in TONE ON selection, press the TONE key for the follow- ing displays.
BASS : | Select this to adjust the low frequency range. |
TREBLE : | Select this to adjust the high frequency range. |
4Use the MULTI CONTROL knob or MULTI %/fi keys to adjust the sound quality.
|
|
| SP | MUTE | STEREO |
L | C | R | A B | CLIP |
|
|
|
|
LFE
SL S SB SR
•The bass and treble levels are adjustable from
•The adjustment item is displayed for approximately 20 seconds.
•This function is available only for speakers connected to FRONT A terminals.
Adjusting the LOUDNESS mode
You can adjust the Loudness function which controls the low volume settings to maintain the music's richness. The adjustment can be made when the receiver is in the PCM stereo and analog stereo mode.
Press the LOUDNESS key to turn the LOUDNESS setting ON.
•This function is available only for speakers connected to FRONT A terminals.
To cancel
Press the LOUDNESS key again so that the “LOUDNESS” indicator goes off.