Normal playback
Input level adjustment (analog sources only) | Adjusting the sound | ||||||
|
| MULTI CONTROL |
| ACTIVE EQ | |||
|
|
| TONE MULTI CONTROL | ||||
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SOUND | INPUT | PHONES | BASS BOOST | VOLUME |
| SELECTOR | |||
|
|
| CONTROL |
Input level adjustment (analog sources only)
If the input level of an analog source signal is too high, the CLIP indicator will blink. Adjust the input level.
|
|
| SP | MUTE |
L | C | R | A B | CLIP |
|
| |||
| LFE |
|
|
|
SL S | SB | SR |
|
|
1Use the INPUT SELECTOR key or Input Selector keys to select the source of which the input level you want to adjust.
• You can store a separate input level for each input source.
2For the remote control unit, press the RCV MODE key to switch to receiver mode.
3Press the SOUND key and 5/∞ keys or MULTI @/# keys repeat- edly until the “INPUT” indication appears.
ACTIVE EQ mode
After completing "Setting up the speakers automatically (AUTO SETUP)", the most suitable equalizer curve for the frequency characteristics of your speakers and the room will be set for each ACTIVE EQ mode.
1For the remote control unit, press the RCV MODE key to switch to receiver mode.
2Press the ACTIVE EQ key for the following selections;
1 | ACTIVE EQ OFF | : The ACTIVE EQ function is turned OFF. |
2 | ACTIVE EQ FLAT* | : Frequency response from speakers are |
|
| flat. |
3 | ACTIVE EQ MUSIC | : Effective when listening to music. |
4ACTIVE EQ CINEMA : Effective when watching movie.
5 ACTIVE EQ GAME | : Effective when playing video game. |
*It can be selected after AUTO SETUP is carried out. | |
SP MUTE | STEREO |
4Use the MULTI CONTROL knob or MULTI %/fi keys to adjust the input level.
L C R
LFE
A B CLIP
|
|
| SP | MUTE | STEREO |
L | C | R | A B | CLIP |
|
|
|
|
LFE
SL S SB SR
•The adjustment mode is displayed for approximately 20 seconds.
•The input level can be adjusted to any one of three settings: 0dB,
5Press the SOUND key to accept the setting.
SL S SB SR
•If THX key is pressed, ACTIVE EQ mode is changed to "ACTIVE EQ FLAT" automatically.
After that you can change the ACTIVE EQ mode by pressing the ACTIVE EQ key.
•ACTIVE EQ function will not be available when in REC mode.