Kenwood VR-9080, KRF-X9090D 29 EN, MUTE, BASS :, VOLUME, TREBLE :, TONE ON/OFF, VOLUME CON- TROL, Press the MUTE key, Press the BASS BOOST key, Press the BASS BOOST key again

Normal playback

Adjusting the TONE

You can adjust the sound quality when the receiver is in the PCM stereo and analog stereo mode, and both THX and Virtual mode are off.

1For the remote control unit, press the RCV MODE key to switch to receiver mode.

2Press the TONE key to select the TONE mode.3Use the MULTI CONTROL knob or MULTI %/ﬁ keys to selectTONE ON/OFF.

			SP	MUTE	STEREO
L	C	R	A B	CLIP
L	C	R

LFE

SL S SB SR

4When in TONE ON selection, press the TONE key for the follow- ing displays.

BASS :	Select this to adjust the low frequency range.
TREBLE :	Select this to adjust the high frequency range.

5Use the MULTI CONTROL knob or MULTI %/ﬁ keys to adjust the sound quality.

			SP	MUTE	STEREO
L	C	R	A B	CLIP
L	C	R

LFE

SL S SB SR

One-touch low frequency emphasis (BASS BOOST)

This setting can be made when the receiver is in the PCM stereo and analog stereo mode, and both THX and Virtual mode are off.

Press the BASS BOOST key.

•Press the key once to select the maximum (+10) low frequency emphasis setting.

•This key does not function when the receiver is in the sound quality or ambience effects adjustment mode.

•This function is available only for speakers connected to FRONT A terminals.

Switching back to the previous setting

Press the BASS BOOST key again.

Muting the sound

The MUTE key lets you mute the sound of the speakers.

Press the MUTE key.

Blinks

			SP	MUTE
L	C	R	A B	CLIP
L	C	R
	LFE
SL S	SB	SR

To cancel

•The bass and treble levels are adjustable from -10 to +10 in 2 step increments.

•The adjustment item is displayed for approximately 20 seconds.

•This function is available only for speakers connected to FRONT A terminals.

Press the MUTE key again so that the “MUTE” indicator goes off.

•MUTE ON can also be deactivated by turning the VOLUME CON- TROL knob or pressing VOLUME %/ﬁ keys.

Setting the LOUDNESS (remote control unit only)

You can adjust the Loudness function which controls the low volume settings to maintain the music's richness. This setting can be made when the receiver is in the PCM stereo and analog stereo mode, and both THX and Virtual mode are off.

Press the LOUDNESS key to turn the LOUDNESS setting ON.

•This function is available only for speakers connected to FRONT A terminals.

To cancel

Press the LOUDNESS key again so that the “LOUDNESS” indicator goes off.

Listening with headphones

1Connect headphones to the PHONES jack.

PHONES

• The sounds from all speakers are cut off.

2Use the VOLUME CONTROL knob or VOLUME %/ﬁ keys to adjust the volume.