Preparing for surround sound
2Use the MULTI CONTROL knob or MULTI %/fi keys to select the distance between left and right Surround Back speaker.
1TOGETHER : The distance is 1 foot (0.3m) or less.
| 2 CLOSE | : The distance is between 1 foot (0.3m) and 4 |
| feet (1.2m). |
| 3 APART | : The distance is 4 feet (1.2m) or more. |
3Press the MEMORY/ENTER key or the ENTER key to accept the setting.
4Adjust the bass peak level.
A restriction is put on the low frequency so that the bass peak level will not go higher than the acceptable level when the volume is increased.
If Subwoofer is OFF, the limitation will affect the low frequency of the Front Left and Right Speakers.
1Press the 5/∞ keys or MULTI @/ # keys to select “BASSPEAK” and press the MEMORY/ENTER key or the ENTER key.
|
| SP | MUTE | STEREO |
L | R | A B | CLIP |
|
|
|
| ||
| LFE |
|
|
|
2Use the MULTI CONTROL knob or MULTI %/fi keys to adjust the bass peak level to
•The adjustment range is from – 30(dB) to 0(dB) and OFF.
3For optimum bass peak level, keep increasing the bass peak level by using the MULTI CONTROL knob or MULTI %/fi keys while test tone is being output until clip sound is heard from the Subwoofer or Front Speaker.
|
| SP | MUTE | STEREO |
L | R | A B | CLIP |
|
|
|
|
|
| SP | MUTE | STEREO |
L | R | A B | CLIP |
|
|
|
|
• The allowable setting range is 0 to 200 ms, adjustable in 10 ms increments.
• Delay is not applied when TUNER, MD/TAPE, PHONO or 6CH INPUT is selected as an input, or AUTO REC MODE or MANUAL REC MODE is selected.
• When in 96kHz fs signal playback, the effectable delay time is up to 100ms.
3Press the MEMORY/ENTER key or the ENTER key to accept the setting.
7Select the display mode.
1Press the 5/∞ keys or MULTI @/# keys to select the “DISPLAY MODE“ and press the MEMORY/ENTER key or the ENTER key.
2Use the MULTI CONTROL knob or MULTI %/fi keys to select the display mode.1DISP SELECTOR : Displays the current input selector.
SW
LFE
SP MUTE
A B CLIP
| 2 DISP LISTEN | : Displays the current listen mode or THX | |||
|
|
|
| mode. |
|
| SP | MUTE | STEREO |
L | R | A B | CLIP |
|
|
|
| ||
5Adjust the LFE LEVEL (Low Frequency Effects).
1 Press the 5/∞ keys or MULTI @/# keys to select the “LFELEVEL“ and press the MEMORY/ENTER key or the ENTER key.2Use the MULTI CONTROL knob or MULTI %/fi keys to adjust the LFE LEVEL.
|
| SP | MUTE | STEREO |
L | R | A B | CLIP |
|
|
|
|
• The LFE LEVEL can be adjusted from 0dB to
3Press the MEMORY/ENTER key or the ENTER key to accept the setting.
6Adjust the AUDIO DELAY.
Depending on video equipments, because of its internal processing moving image on the Monitor may seem to be delayed compared to the audio from the speakers. This can be adjusted by audio delay which delays audio to match the video picture.
3Press the MEMORY/ENTER key or the ENTER key to accept the setting.
8Lock the settings.
In case that the keys are mistakenly pressed, the setting can be locked.
1Press the 5/∞ keys or MULTI @/# keys to select the “SET-TING LOCK“ and press the MEMORY/ENTER key or the ENTER key.2Use the MULTI CONTROL knob or MULTI %/fi keys to select the lock mode.1 SETUP LOCKED : Lock the settings.
2SETUP UNLOCKED : Unlock the settings.
3Press the MEMORY/ENTER key or the ENTER key to accept the setting.
9Exit the SETUP mode.
1Press the 5/∞ keys or MULTI @/# keys to select the “EXIT“.
|
| SP | MUTE | STEREO |
L | R | A B | CLIP |
|
|
|
|
SL S SB SR
2Press the MEMORY/ENTER key or the ENTER key to return to the display mode selected in step 7.