Ambience effects

Dimension mode (Pro Logic IIx Music mode and Pro Logic II

Music mode only)

When listening to music with certain recordings, you will also be able to achieve a suitable balance from all the speakers by adjusting the dimension mode.

1Press the SOUND key, then press the 5/∞ keys or MULTI @/# keys until “DIMENSION” appears on the display.

2Use the MULTI CONTROL knob or MULTI %/fi keys to adjust the soundfield towards the rear or the front.

Soundfield is adjusted towards the front.

 

 

SP

MUTE AUTO DETECT

 

L

R

A B

CLIP

DOLBY PL II x

 

 

LFE

Center Image mode (Neo:6 Music mode only)

In the CENTER IMAGE setting mode of the Neo:6 Music listen mode, it is possible to enhance the center channel audio by adjusting the center signal component.

1Press the SOUND key, then press the 5/∞ keys or MULTI @/# keys until “CENTER IMAGE” appears on the display.

 

 

SP

MUTE AUTO DETECT

STEREO NEO:6

L

R

A B

CLIP

 

 

 

 

• When the center speaker is switched OFF, this mode will not be effective.

2Use the MULTI CONTROL knob or MULTI %/fi keys to adjust the left-center-right output.

Soundfield is adjusted towards the rear.

 

 

SP

MUTE AUTO DETECT

 

L

R

A B

CLIP

DOLBY PL II x

 

 

LR

LFE

S SB

SP

MUTE AUTO DETECT

NEO:6

A B CLIP

LFE

3Press the SOUND key again to return to the input indication.

• Adjust the center component level.

3Press the SOUND key again to return to the input indication.

Center Width mode (Pro Logic IIx Music mode and Pro Logic II

Music mode only)

Center width adjustment allows you to enjoy an enhanced sound when listening to music through center image from only center speaker, or left and right speakers or various combinations adjustments.

1Press the SOUND key, then press the 5/∞ keys or MULTI @/# keys until “CENTER WIDTH” appears on the display.

•The CENTER WIDTH indication scrolls across the display.

•When the center speaker is switched OFF, this mode will not be effective.

2Use the MULTI CONTROL knob or MULTI %/fi keys to adjust the left-center-right output.

Center image will be heard from center speaker only.

 

 

SP

MUTE AUTO DETECT

 

L

R

A B

CLIP

DOLBY PL II x

 

 

LFE

S SB

Center image will be heard from left and right speakers only.

 

 

SP

MUTE AUTO DETECT

 

L

R

A B

CLIP

DOLBY PL II x

 

 

LFE

S SB

•When in other position, center image from center speaker, left and right speakers can be heard simultaneously with various combinations.

3Press the SOUND key again to return to the input indication.

Dual Mono mode (Dolby Digital mode only)

When the Dolby Digital source have Multiplex sound, you can select Main / Sub sound for Audio output.

1Press the SOUND key, then press the 5/∞ keys or MULTI @/# keys until “DUAL MONO” appears on the display.

•This can be selected only if CD/DVD, DVD/6CH, VIDEO 2 or VIDEO 3 is selected as the source and the LISTEN mode is set to “Dolby Digital”.

2Use the MULTI CONTROL knob or MULTI %/fi keys for the following selection.

1

Main

: Multiplex Main channel output.

2

Sub

: Multiplex Sub channel output.

3

Main + Sub

: Multiplex Main + Sub channel output.

4

Stereo

: Main channel from the left speaker .

 

 

/ Sub channel from the right speaker.

SP

MUTE AUTO DETECT DIGITAL

DOLBY DIGITAL

STEREO

A B

CLIP

 

 

LFE

 

 

 

• The adjustment item is displayed for approximately 20 seconds.

3Press the SOUND key again to return to the input indication.

96kHz LPCM playback

The receiver is compatible with the 96kHz LPCM playback. To play a 96kHz DVD, set the listen mode other than DSP mode.

(96kHz fs indicator lights up)

•When the listen mode is set to DSP mode, the listen mode will automatically be Stereo.

40 EN