Basic remote control operations for other components

Re-assigning device keys

The remote control can be setup to control second TV or VCR, or any combination of eight home entertainment components.

For example, to control the operation of two different VCR using the remote control, the user need to re-assign the unused VIDEO 2 key to operate the second VCR (VIDEO 1) as follows:

1Press and hold the LEARN key untilblinks twice, then release the LEARN key.

2Press the Numeric key to enter 9, 9, 2.

•will blink twice.

3Press VIDEO 1 key once, then press the VIDEO 2 key once.

•The user now can operate VIDEO 2 as a second VCR along with VIDEO 1.

•Refer to the table in the previous page for the combination of source

keys and the other components assignment.

w

4To re-assign other device keys, repeat steps 1 through 3 by substituting the key sequence from the below chart for the most popular components:

To re-assign key

Sequence

Perform

 

 

TV MODE as 2nd VIDEO 1 key LEARN

9 9 2

VIDEO 1

TV MODE

TV MODE as 2nd VIDEO 2 key LEARN

9 9 2

VIDEO 2

TV MODE

TV MODE as 2nd CD/DVD key LEARN

9 9 2

CD/DVD

TV MODE

TV MODE back to TV MODE key LEARN

9 9 2

TV MODE TV MODE

VIDEO 1 as 2nd TV MODE key LEARN

9 9 2

TV MODE VIDEO 1

VIDEO 1 as 2nd VIDEO 2 key

LEARN

9 9 2

VIDEO 2

VIDEO 1

VIDEO 1 as 2nd CD/DVD key

LEARN

9 9 2

CD/DVD

VIDEO 1

VIDEO 1 back to VIDEO 1 key

LEARN

9 9 2

VIDEO 1

VIDEO 1

5To clear the re-assignment and reset the remote control to its original operation mode:

1Press and hold the LEARN key untilblinks twice, then release the LEARN key.

2Press the Numeric key to enter 9 , 9 , 2.

3Press VIDEO 2 key twice.

•When a re-assignment is done,will blink twice to confirm your choice. At that time, you will need to program the remote control in order to control the new component.

•If an invalid key sequence is entered,blink once and return to normal operation.

•When in Tuner mode, re-assignment is not available.

Operating other components

This operation lets you operate the registered components.

SOURCE

(Source power)

Source keys

1Use the Source keys to select the component you desire.

•Pressing the source keys also changes the input selector on the receiver.

2Press theSOURCE key.

• To return to the receiver operation mode, press the RCV MODE key.

3Press the operation keys you desire.

o

The remote control mode remains at the selected input. If you wish to operate another component, repeat step 2 or 3.

Resetting the Remote Control

•To initialize the remote control, press the LEARN key until the blinks twice. Then press the Numeric key to enter 9, 8, 1. The will blink twice.

43 EN