Preparing for surround sound
| the | appropriate Surround Speaker setting. |
1SURR NML/THX : Average size Surround Speakers are con-
|
| nected to the receiver. |
2 | SURR LARGE | : Large size Surround Speakers are |
|
| connected to the receiver. |
3 | SURR OFF | : Surround Speakers are not connected to |
|
| the receiver. |
1SURR NML/THX : Average size Surround speakers are connected to the receiver.
| 2 SURR OFF | : Surround Speakers are not connected to |
| the receiver. |
•When the setting other than “SURR OFF” is selected, the Surround Back Speaker setting indication “SB” appears.
•When the setting “SURR OFF” is selected, the procedure skips to step @.
!Use the MULTI CONTROL knob or MULTI %/fi keys to select appropriate Surround Back Speaker setting.
If you selected “SURR LARGE” as the Surround Speaker setting,1SB NML/THXx1 : A single average size Surround Back Speaker is connected to the receiver.
2SB NML/THXx2 : A pair of average size Surround Back Speak-
ers are connected to the receiver. |
3 SB LARGEx1 : A single large size Surround Back Speaker |
| 1 T.TONE AUTO | : Adjust the volume level from each |
| speaker by using test tone. |
| Test tone will be output from each |
| speaker in order. |
2T.TONE MANUAL : Adjust the volume level from each speaker
by using test tone.
3 | T.TONE OFF | : Adjust the volume level from each |
|
| speaker without using test tone. |
4 | RETURN | : Press the MEMORY/ENTER key or the |
|
| ENTER key to return to the “SP LEVEL“ |
|
| display. |
3After selecting “T.TONE AUTO” or “T.TONE MANUAL”, press the MEMORY/ENTER key or the ENTER key to begin
TEST TONE.Use the MULTI CONTROL knob or MULTI %/fi keys to adjust the volume level of the test tone output from the speaker channel to be adjusted.
For T.TONE AUTO selection, the test tone is heard from the speakers in the following sequence for 2 seconds each start- ing from the Front Left speaker.
|
| LEFT | CNTR | RIGHT | SR |
| |
|
|
|
|
|
|
|
|
|
| SUBW | SL | SBL | SBR |
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
•If you have selected “SB NML/THXx1” or ”SB LARGEx1”, “SBR” and “SBL” are not appeared but “SB” is appeared on the Display.
The channel indication blinks while the test tone is being output.
is connected to the receiver. |
4 SB LARGEx2 : A pair of large size Surround Back Speak- |
ers are connected to the receiver. |
L C SW R
LFE
SP MUTE
A B CLIP
| 5 SB OFF | : Surround Back Speakers are not connected |
| to the receiver. |
SP MUTE | STEREO |
SL SB SR
•If the speaker setting selects are OFF, the speaker level settings are reset.
L C SW R
LFE
A B CLIP
SL SB SR
If you selected “SURR NML/THX” as the Surround Speaker setting,1SB NML/THXx1 : A single average size Surround Back
Speaker is connected to the receiver.
2SB NML/THXx2 : A pair of average size Surround Back Speak-
| ers are connected to the receiver. |
| 3 SB OFF | : Surround Back Speakers are not connected |
| to the receiver. |
@Press the MEMORY/ENTER key or the ENTER key to return to the “SP SETUP” display.
2Adjust the speaker volume level.
If you have a commercially available sound pressure meter, set the meter readout to "C" at the listening position and adjust the sound volume of each channel so that the noise level will reach 75dB. If you do not have a sound pressure meter, start the volume level from 0db and adjust so that the level from each speaker is almost the same.
•Indicators appear only for the channels of the speakers selected in step 1.
Be aware that the TEST TONE is quite a lod sound (0dB).1Press the 5/∞ keys or MULTI @/# keys to select the “SP LEVEL“ and press the MEMORY/ENTER key or the ENTER key.
For “T.TONE MANUAL” selection, press the 5/∞ keys or MULTI @/# keys each time to select the speaker channel.
If “T.TONE OFF” is selected, test tone is not output. Adjust the volume level from each speaker by listening the selected
| input source. | ¢ |
4Press the MEMORY/ENTER key or the ENTER key to return to the “SP LEVEL“ display.
• The test tone is turned off and return to the main setup displays.
3Input the distance to the speakers.
•Indicators appear only for the channels of the speakers selected in step 1.
1Press the 5/∞ keys or MULTI @/# keys to select the “SPDISTANCE“ and press the MEMORY/ENTER key or the EN- TER key.2Use the 5/∞ keys or MULTI @/# keys to select a unit in distance and press the MEMORY/ENTER key or the ENTER
key.1UNIT meters2 UNIT feet3 RETURN