Key Digital KD-CDA12, KD-DA6 user manual When running long lengths of cable please make

HD View12 Model KD-CDA12

OPERATING INSTRUCTIONS

input signal to all of the output connectors (the com- ponent video and audio output connectors are marked “output” the KD-DA6 has one bank of 6 (Marked 1 through 6) sets of output connectors. The KD-CDA12 has two banks (Marked Channel 1 and 2, each corresponding to their respective inputs) of 6 each output connectors. Each of the RCATM-style connectors are conveniently color coded to match most “Source” and “Display” devices available in the consumer industry; Red, Green and Blue for Component video; White, and Red for left and right audio respectively (PCM audio can be distributed using either the left or right audio channel). When applicable, connecting the KD-DA6 and the KD-CDA12 is as simple as matching the proper color coded con- nectors.

*When inserting the RCATM style connectors use a slight twisting motion when inserting the cables, this assures a proper connection by seating the RCSTM connector all the way in. *

*Be careful not to confuse the Red lead of a compo- nent video cable with the Right or Red audio channel. Most often the audio wire is of thinner gauge wire and is together with the White or Left audio lead! The Red lead from the component video cable is often attached to the Green and Blue lead from the compo- nent cable as well. *

* When running long lengths of cable please make

Page 5