HD View12 Model KD-CDA12

OPERATING INSTRUCTIONS

The KD-CDA12 can be configured in 3 separate modes:

Mode1: 2 inputs each driving 6 outputs each ‡ 2X6 Mode (factory Default).

Mode2: 1 input driving 12 outputs with the unused input driving the next amplifier ‡ NX12 mode. Mode 3: 1 Input driving 12 outputs ‡ 1X12 mode.

Mode 1: The KD-CDA12 has two sets of inputs! This essentioally allows for independent connection of two “Source” devices and usage of the KD-CDA12 as two separate KD-DA6’s. Using this configuration it is possible to distribute two discreet Audio/Video sig- nals to two banks of 6 different “Display” devices each (use the hookup described above for the KD- DA6). The dipswitches on the unit should be set to the following:

_1

2

3 4 _5

_6

7

8

SW1

 

ON

OFF

ON ON OFF

OFF

ON

ON

_________________________________________________________________________________________

SW2 ON OFF ON ON ON OFF OFF ON

*Please refer to the illustration for 2X6 termination mode. *

Mode 2: The KD-CDA12 can also be cascaded or “Daisy Chained”. Using hookup-method allows multi- ple units to be connected in series. One of the two

Page 7

Page 7
Image 7
Key Digital KD-CDA12, KD-DA6 SW2 on OFF on on on OFF OFF on, Please refer to the illustration for 2X6 termination mode