13
To convert to LP gas, the LP Gas Conversion Kit Part Number
W10118099 must be used. Follow instructions included with kit.
LP Gas Conversion Using a 20 lb LP Gas Fuel Tank
To convert to LP gas, the LP Gas Conversion Kit Part Number
W10118099 must be used. Follow instructions included with kit.
A 20 lb LP gas fuel tank must be purchased separately.
INSTALLATION INSTRUCTIONS

Built-in Outdoor Side Burner Installation

■Unpack side burner. Remove all packaging materials and
remove side burner from carton.
■Place side burner into outdoor enclosure, but leave enough
room in back to connect to gas supply and electrical single
prong plug-in.

Install Tank Tray for 20 lb LP Gas Fuel Tank

For Models Equipped for Use with a 20 lb LP Tank

1. Position the tank tray for 20 lb LP gas fuel tank in the island
cabinet.
2. Square the tank tray mounting brackets and mark the
mounting hole locations in the island base.
3. Remove the top nuts (4) from the tank tray assembly and lift
the tank tray off of the mounting brackets.
A.Side burner gas pipe
B.New CSA International approved
“outdoor” flexible gas supply line
C.Rear of side burner
D.To local gas supply
A
B
C
D
WARNING
Excessive Weight Hazard
Use two or more people to move and install side
burner.
Failure to do so can result in back or other injury.
Dimension A Dimension B
Front to back burner 8³⁄��₂" (20.6 cm) 16³⁄₁₆" (41.1 cm)
Side by side burner 12⁹⁄₁₆" (31.9 cm) 25¹⁄₈" (63.8 cm)
A.Top nut
B.Tank tray
C.Bottom nut
D.Bolt
E.Mounting bracket
B
2¹⁄₄"
(5.7 cm)
18³⁄₈"
(46.7 cm)
20⁵⁄₈"
(52.4 cm)
A
centerline of
tank tray
A
B
C
D
E