7
Cabinet Dimensions
Counter or support surfaces must be level.
The installation of this side burner must conform with local codes
or, in the absence of local codes, with either the National Fuel
Gas Code, ANSI Z223.1/NPFA 54, Natural Gas and Propane
Installation Code, CSA B149.1, or Propane Storage and Handling
Code, B149.2.
Copies of the standards listed may be obtained from:
CSA International
8501 East Pleasant Valley Rd.
Cleveland, Ohio 44131-5575
NOTE: The outdoor side burner drops into the enclosure opening
and is supported by its side flanges. No bottom support is
needed.
The following dimension chart and illustration include cutout dimensions and minimum spacing requirements for all built-in outdoor
products. The illustration is for reference. The design of your cabinet layout can be personalized, but the dimensions for the cutouts and
minimum spacing must be followed.
*NOTE: Maintain a minimum ³⁄₄" (1.9 cm) countertop overhang from the door/drawer mounting surface to help keep water runoff from
the countertop out of the door or drawer.
**Each corner of countertop cutouts for built-in grill, side burner, sear burner, Power™ burner and refreshment center.

E

HA

G

K

KF

K
B
J
E
20⁵⁄₈" (52.4 cm)
1¹⁄₂"
(3.8 cm) min.
3" (7.6 cm) min.
to open hood
2¹⁄₂" (6.4 cm) min.
20⁷⁄₈" (53.0 cm)
9¹⁄₈"
(23.2 cm)
5"
(12.7 cm) min.
M
L
K
K
Grills
Side,
Sear
or
Power™
Burners
Warming
Drawer Access Doors
Refrigerator
or
Ice Maker
Utility
or
Trash
Drawer
12" (30.5 cm) min.
from any outdoor
cooking appliance to other
outdoor accessories.
Cabinet
Face
Cabinet
Face
*Overhang distance
between edge of
countertop and cabinet face
**1¹⁄₈" (2.9 cm) Typical
notch width
D
D
(from cabinet
face
)
(from cabinet
face
)
12" (30.5 cm) min.
from any outdoor
cooking appliance to
other outdoor accessories.
C
C