6
Location Requirements
Select a location that provides minimum exposure to wind and
traffic paths. The location should be away from strong draft
areas.
Do not obstruct flow of combustion and ventilation air.
Clearance to combustible construction for built-in outdoor side
burners:
■A minimum of 24" (58 cm) must be maintained between the
sides and back and any combustible construction.
■A zero clearance may be maintained below the cooking
surface and any combustible construction.

Ignition

A grounded, 3-prong outdoor GFI outlet is to be located inside
the island cabinet and to the left of the side burner. See
“Electrical Requirements” section.
Product Dimensions

Style 1 - Front to Back Built-In Dual Side Burners

Style 2 - Side by Side Built-In Dual Side Burners

Built-In Outdoor Side Burner Enclosure

This built-in outdoor side burner is for installation in a built-in
enclosure constructed of combustible and non-combustible
materials. Some types of noncombustible materials could be
brick, firewall or steel. Some types of combustible materials
could be wood or laminate.
The enclosure for the built-in outdoor side burner is to be a
minimum of 11" (28.0 cm) high x 23" (58.4 cm) deep x
14" (35.6 cm) wide for front to back model and 11" (28.0 cm)
high x 17" (43.2 cm) deep x 25" (63.5 cm) wide for side by side
model.
A.13" (33 cm)
B.10⁵⁄₈" (27 cm)
C.17" (43.2 cm)
D.26³⁄₈" (67 cm)
E.25³⁄₈" (64.5 cm)
F.Manifold pipe
G.4³⁄₈" (11.1 cm)
H.22³⁄₄" (57.8 cm)
B
A
DEFGH
B
C
A.24" (61 cm)
B.10⁵⁄₈" (27 cm)
C.28" (71.1 cm)
D.20¹⁄₂" (52.1 cm)
E.19¹⁄₂" (49.5 cm)
F. Ma ni fo ld pi pe
G.4³⁄₈" (11.1 cm)
H.17" (43.2 cm)
B

A

D
E
F
G
H

B

C