OPTIONS - STYLES 2 AND 3
OptionsSelection Pad
The OPTIONS selection pad allows you to access special functions within the Electronic Oven Control that allow you to customize the product to your needs. These special functions allow you to change the oven temperature between Fahrenheit and Celsius, turn the audible signals and prompts on and off and adjust the oven calibration. The Sabbath Mode is also set using the OPTIONS selection pad.
To Use: Press OPTIONS and number pad to quickly access desired hidden function.
OPTIONS | SPECIAL FUNCTION |
|
|
1 | Sets Fahrenheit |
2 | Sets Celsius |
3 | Sets Tones On |
4 | Sets Tones Off |
7 | Cooking Time Completion Tones On |
8 | Cooking Time Completion Tones Off |
9 | Oven Temperature Calibration |
0 | Sabbath Mode |
Fahrenheit and Celsius
Press options, then 1 on the keypad for Fahrenheit. Press options, then 2 on the keypad for Celsius.
Tones
Tones are audible signals, indicating the following:
One beep
■Function has been entered
Three beeps
■Invalid pad press
Timer Completion Tones
Four beeps occur when the timer reaches zero. This can be when using the timer for functions other than cooking.
Cooking Time Completion Tones
Four beeps indicate the end of a cooking cycle.
To turn On/Off: Press OPTIONS, and then 7 to turn ON. Press OPTIONS, and then 8 to turn OFF.
Preheat Completion Tone
One beep indicates a preheat cycle has been completed.
All Tones
All tones are preset ON, but can be turned OFF. To turn tones ON, press the options key, then press keypad 3. To turn tones OFF, press the options key again, and then press keypad 4.
Tone Volume
The volume is preset at high, but can be changed to low.
To Change: Press and hold COOK DURATION for 5 seconds to raise the volume. Repeat to lower the volume.
Oven Temperature Calibration
IMPORTANT: Do not use a thermometer to measure oven temperature because opening the oven door during cycling may give incorrect readings.
The oven provides accurate temperatures; however, it may cook faster or slower than your previous oven, so the temperature calibration can be adjusted. It can be changed in Fahrenheit or Celsius.
A minus sign means the oven will be cooler by the displayed amount. The absence of a sign means the oven will be warmer by the displayed amount. Use the following chart as a guide.
ADJUSTMENT °F (AUTOMATIC | COOKS FOOD |
°C CHANGE) |
|
|
|
10°F (5°C) | ...a little more |
|
|
20°F (10°C) | ...moderately more |
|
|
35°F (15°C) | ...much more |
|
|
...a little less | |
|
|
...moderately less | |
|
|
...much less | |
|
|
To Adjust Oven Temperature Calibration:
1.Press OPTIONS, and then 9 to set the calibration.
2.Press 3 to increase the temperature, or press 6 to decrease the temperature.
3.Press START to end calibration.
14