REFRIGERATOR USE
5.Press LOCK, under plus, to raise the set point, or press OPTIONS, under minus, to lower the set point.
Save/Confirm Temperature Settings
■When you have finished adjusting both the refrigerator and freezer set points, press MEASURED FILL “Confirm” to save the settings.
NOTE: To exit Temperature mode without saving changes, press the ICE MODE button under Back at any time, or allow about 60 seconds of inactivity. The temperature mode will turn off automatically and return to the normal screen.
When adjusting temperature set points,
use the following chart as a guide:
CONDITION: | TEMPERATURE |
| ADJUSTMENT: |
|
|
REFRIGERATOR too cold | REFRIGERATOR Setting |
| 1° higher |
|
|
REFRIGERATOR too warm | REFRIGERATOR Setting |
| 1° lower |
|
|
FREEZER too cold | FREEZER Setting |
| 1° higher |
|
|
FREEZER too warm / | FREEZER Setting |
Too little ice | 1° lower |
|
|
Cooling On/Off
Your refrigerator and freezer will not cool when cooling is turned off.
■To turn cooling off, press and hold the LOCK and MEASURED FILL buttons at the same time for 3 seconds. When cooling is off, “Refrigeration Cooling is Off” will appear on the display screen as shown.
IMPORTANT: To avoid unintentionally locking the dispenser or changing other settings, be sure to press both buttons at exactly the same time.
A. Press LOCK and MEASURED FILL at the same time.
■To turn cooling back on, press and hold LOCK and MEASURED FILL for 3 seconds again. “Cooling is Off” will disappear from the display screen.
Options
Press the OPTIONS button to open the Options menu and select between Max Cool, Max Ice and Water Filter Status.
Press the ICE MODE button at any time to return to the Normal screen.
Max Cool
The Max Cool feature assists with periods of high refrigerator use, full grocery loads, or temporarily warm room temperatures.
■To turn on the Max Cool feature, press the OPTIONS button to enter Options mode, then press the LOCK button, under Max Cool, to activate the feature. When the feature is on, the Max Cool icon will appear on the dispenser display screen. The Max Cool feature will remain on for 24 hours unless manually turned off.
■To manually turn off the Max Cool feature, press the OPTIONS button to enter Options mode (unless you are already in Options mode), then press LOCK again. When the feature has been turned off, the Max Cool icon will disappear from the dispenser display.
■NOTE: Setting the freezer to a colder temperature may make some foods, such as ice cream, harder.
Max Ice
The Max Ice feature assists with temporary periods of heavy ice use by increasing ice production.
■To turn on the Max Ice feature, press the OPTIONS button to enter Options mode, then press the TEMPERATURE button, under Max Ice, to activate the feature. When the feature is on, the Max Ice icon will appear on the dispenser display screen. The Max Ice feature will remain on for 24 hours unless manually turned off.
■To manually turn off the Max Ice feature, press the OPTIONS button to enter Options mode (unless you are already in Options mode), then press TEMPERATURE again. When the feature has been turned off, the Max Ice icon will disappear from the dispenser display.
Water Filter Status
Press FILTER STATUS to display the percentage of use remaining in the water filter (from 100% to 0%).
ALSO
The water filter status lights will let you know when to change your water filter.
■ORDER FILTER (Yellow) - Order a replacement water filter.
■REPLACE FILTER (Red) - Replace the water filter. Replacing the disposable water filter will automatically reset the water filter status tracking feature. See “Water Filtration System.”
20
