KitchenAid KFPM773, KFPM770, KFPW760, KFPW763 Halve the fruit to be juiced Place fruit half on cone

Preparing the Food Processor for Use

ENGLISH

4.The 2-piece cone offers two sizes; choose the right size for the fruit you are juicing. Use the outer cone for grapefruit, oranges and other large fruits. Remove the outer cone to reveal a smaller inner cone that’s perfect for lemons and limes.

5.Open the lid and place the cone inside the strainer basket over

the power shaft. It may be necessary to rotate the cone until it falls into place.

6.Halve the fruit to be juiced.

7.Place fruit half on cone.

8.Close the lid of the strainer basket. Hold the lever arm down firmly with an open palm to maintain even pressure. Operate the citrus press only when the lever arm is in the down position, holding the fruit on the cone.

9.Operate the citrus press by pressing the ON Button or the PULSE Button.

10.When juice is fully extracted, Press the OFF Button.

NOTE: Do not exceed the maximum liquid level line on the work bowl, or juice will leak from the bowl.

11.Unplug the food processor.

12.Unlock the strainer basket by turning it clockwise. Remove juiced fruit, cone, and strainer basket from the work bowl.

13.Remove the work bowl from Food Processor and pour juice into desired container.

14.To detach the clip-on lever arm from the strainer basket for thorough cleaning, pull the clip at the bottom of the basket away from the basket side and remove the lever arm from the basket.

15.When reattaching the lever arm to the strainer basket, make sure the tabs on the clip snap securely into a pair of holes in the bottom of the basket.

NOTE: Use of the citrus press without the clip-on lever arm is not recommended. If you do use it without the lever arm, remove the lever arm from the basket (see Step 14).

12