KitchenAid KFPW763, KFPM770 Dough Blade Assembly, Slicing, Shredding, and Cutting Disc Assembly

Preparing the Food Processor for Use

6. Fit the 2-piece food pusher (on models	Multipurpose Blade and
KFPW760 & KFPM770) or the 3-piece	Dough Blade Assembly
food pusher (on models KFPW763	1.	Place the blade on the power shaft.
& KFPM773) into the Ultra Wide
	2.	Rotate the blade so it falls into place
Mouth™ feed tube.
		on the shaft.

ENGLISH

NOTE: Your Food Processor will not operate unless the work bowl and work bowl cover are properly locked on the base, and the large pusher is inserted to the maximum fill line on the feed tube (approximately halfway down).

To avoid damage to the work bowl, do not remove the work bowl from the base without first removing the work bowl cover.

Slicing, Shredding, and Cutting Disc Assembly

1.Place the disc stem on the power shaft.

Continued on next page

9