Cornelius UFB-1, UF-1 manual Mounting Block Disassembly, System Details

UF-1 and UFB-1 Valves Training Manual

16.Then remove 5 screws that secure the valve head to the valve body.

Pry here

17. To remove the dispensing lever return spring pry the end of the spring and pull up. This spring stops the lever from vibrating.

4.2 Mounting Block Disassembly

To disassemble mounting block:

1. Turn off water and syrup supplies.

2. Remove 2 screws from top plate and pull spools out from the bottom of the mounting plate exposing spools and O-rings.

O-rings

SYSTEM DETAILS

Note: When replacing mounting block use replace- ment O-rings for the inlet fittings.

Block closed (up)

3. When installing a new block, make sure it is locked in the open position..

Block open (down & locked)

- 12 - © 1999-2005, IMI Cornelius Inc.