Flow rate & date code
12. Note that the flow rate (1 ½ - 3, 3 – 4 ½ or 1 ½ - 3 juice) and date code are printed on the retainer plate.
13.To disassemble the flow control: Remove screws and pull retainer forward. Remove top flow con- trol subassemblies exposing flow controls.
Note the difference between high flow and ultra flow valves.
Note: Top Flow control is an assembly and cannot be dissas- embled.
Concentrate valve sleeve has one hole
Ultra Flow |
|
notched |
|
piston for | Syrup valve sleeve |
water | |
| has six holes |
14.Pop off solenoid cover. Remove solenoid assembly from valve body by prying with screwdriver.
Note: Check plunger for corrosion and dirt – replace as necessary.
Solenoid
plunger
Pry here
Solenoid cover
Spring
15. Carefully remove banjo lever springs.
© | - 11 - |
SYSTEM DETAILS