Now start...

1. Put a thick protective covering over cooktop, set-in range or countertop to protect from damage or dirt.

If installing over a freestanding range, disconnect and move the range to provide easier access to the upper cabinet and rear wall.

Slide range onto cardboard or hardboard before moving to prevent damaging floor covering.

2. Place hood on a protective cover with filters facing down.

3. Determine which venting method (roof, wall or non-vented) will be used.

•The hood is factory-set for roof venting.

•For non-vented installations, go to Step 4.

seal plate

vent connection

If venting through the wall, remove seal plate from back of hood and vent connector from top of hood. Reinstall vent connector onback of hood and seal plate on top of hood.

top

knockout

do not use

centerlines

5. Mark centerlines on rear wall and upper cabinet bottom.

For non-vented installations: Extend centerline up onto soffit above hood.

template

6. Align centerlines of template with centerlines marked on rear wall and upper cabinet bottom. Tape template in place. Mark location of the four holes used to secure hood to upper cabinet.

7. Depending on your installation, mark location of the wiring hole or vent cutout in upper cabinet or back wall needed as shown on template.

8. Remove template.

9. Drill four 3/16" (5.0 mm) diameter holes through upper cabinet for the hood mounting screws.

10. Drill the 1-1/2" (4.0 cm) wiring hole.

11. Make the vent cutout for

3-1/4" x 10" (8.3 x 25.4 cm) rectangular vent system. Note: It is recommended that vent system be installed before installing hood.

12. Turn the hood over so

13. Rotate deflector away from filters. Pull grease filter handles toward back of hood to release locking tabs. Lift filters up, remove from hood and set aside.

screw locations

screw

14. Remove 2 screws from light panel tabs. On light panel surface directly behind tabs, push toward back of the hood to move tabs out through the slots. Remove panel and set aside with screws.

remove screws

wiring

box cover

15. Remove 2 screws from wiring box cover located in the right hand rear corner and remove cover. Attach the U.L.- or CSA-

back knockout

these

knockouts

filters face up.

listed strain relief to the hood wiring hole being used.

4. Remove knockout from the wiring opening (top or back) to be used.

4

16. Turn hood over so filters face down.

Page 3 Page 5
Page 4
Image 4
KitchenAid KHTU160 installation instructions Now start
Page 3 Page 5

KHTU160 specifications

The KitchenAid KHTU160 is a standout appliance designed for culinary enthusiasts who demand both style and performance in their kitchen. This versatile kitchen tool combines modern technology with user-friendly features, making it an essential addition to any cooking space. With its sleek design and robust build, the KHTU160 not only enhances the aesthetic of your kitchen but also stands as a testament to KitchenAid’s commitment to quality.

One of the flagship features of the KHTU160 is its powerful motor, which allows it to handle a wide variety of food preparation tasks, from mixing dough to whipping cream. The motor is thoughtfully designed to provide consistent power, ensuring that your mixtures achieve the perfect consistency every time. The appliance also boasts multiple speed settings, allowing users to customize their mixing according to the specific requirements of the recipe.

In addition to its power, the KitchenAid KHTU160 is equipped with innovative technologies that enhance its usability. The Intelli-Speed Motor Control ensures that the motor automatically adjusts its speed to match the needs of the mixture. This feature prevents the risk of over-mixing or under-mixing, which can be crucial in baking where precision is key.

The design of the KHTU160 also prioritizes ease of use. Its bowl-lift design allows for easy access to the mixing bowl, making it simple to add ingredients or scrape down the sides while mixing. The stainless steel bowl, often included with the mixer, provides durability and is easy to clean, allowing for a seamless transition between tasks.

Complementing its practical features, the KitchenAid KHTU160 is also highly versatile, compatible with a wide range of attachments. From pasta makers to food grinders, users can expand the functionality of this mixer according to their culinary needs.

Moreover, the appliance showcases a timeless aesthetic, with various color options to suit different kitchen decors. Whether you prefer a classic white or a bold red, the KHTU160 adds a touch of elegance to your countertop.

In summary, the KitchenAid KHTU160 stands out for its powerful motor, intelligent speed control, user-friendly design, and versatility. This appliance is perfect for both novice home cooks and seasoned chefs, ensuring a smooth and enjoyable cooking experience, making it a worthy investment for any kitchen.
Top Page Image Contents