KitchenAid KP26M1X manual Attachments and Accessories, Care and Cleaning, General Information

Attachments and Accessories

General Information

KitchenAid® Attachments are designed to assure long life. The Attachment Power Shaft and Hub Socket are of a square design, to eliminate any possibility of slipping during the transmission of power to the attachment. The hub and shaft housings are tapered to assure a snug fit, even after prolonged use and wear. KitchenAid® Attachments require no extra power unit to operate them; the power unit is built-in.

Attachment Power Shaft

Hinged Hub Cover

Attachment

Hub Socket

Attachment

Knob

Notch

Attachment Housing Pin

Attachment Shaft Housing

Care and Cleaning

The Stainless Steel Bowl, Coated Metal Flat Beater, Stainless Steel Wire Whip, and Coated Metal Spiral Dough Hook may be washed in an automatic dishwasher. Or, clean them thoroughly in hot sudsy water and rinse completely before drying. Do not store beaters on shaft.

NOTE: Always be sure to unplug Stand Mixer before cleaning. Wipe Stand Mixer with a soft, damp cloth. Do not use household/commercial cleaners. Do not immerse in water. Wipe off Beater Shaft frequently, removing any residue that may accumulate.

Accessories	Burnished Metal	Coated Metal	Stainless Steel
	Burnished metal	White or silver	Not applicable
	beater and dough	coated metal beaters
	hook should be	are dishwasher-safe.
	hand washed. May	(Available on most
	discolor if used in	models)
	dishwasher.
	Not applicable	Not applicable	All wire whips are stainless
			steel and should be hand
			washed only.
	Not applicable	Not applicable	All metal bowls are stainless
			steel and dishwasher-safe.
			(Available on all bowl-lift
			models)

10