Setting up your Stand Mixer

Getting Started with your new Bowl-Lift Stand Mixer

IMPORTANT SET-UP INFORMATION:

For best performance, please go through these quick steps before using your Stand Mixer

Step 1: Make sure Stand Mixer is turned to the OFF position and is unplugged.

Fig. 1

 

Step 2: Attach the Stainless Steel Bowl to the Stand Mixer. Fit

 

 

Bowl Supports over Locating Pins and press down on back of the bowl until

 

 

Bowl Pin snaps into Spring Latch. (Fig. 1).

 

Spring Latch

IMPORTANT: If bowl is not securely snapped into place, it will be unstable

 

and wobble during use.

 

 

 

Locating Pin

 

Fig. 2

 

Step 3: Attach Flat Beater. Slip Flat Beater onto the Shaft. Turn left,

 

 

hooking beater over the Pin. (Fig. 2)

 

Pin

 

English

Fig. 3

Step 4: Raise Bowl to mixing position. Rotate Bowl Lift Lever

 

counterclockwise to the straight up position. (Fig. 3) The bowl must always

 

be in the raised position when mixing.

7

Page 7
Image 7
KitchenAid KP26M1X manual Setting up your Stand Mixer, Getting Started with your new Bowl-Lift Stand Mixer