Manuals / KitchenAid / Kitchen Appliance / Coffeemaker

KitchenAid KPCG100 manual Replacing the Cutting Burrs, To replace the burrs

Models: KPCG100

1 38

Download 38 pages 44.8 Kb

Page 30

Replacing the Cutting Burrs

Replacing the Cutting Burrs

If the cutting burrs are damaged, or have reached the end of their life (usually after grinding 600–800 lbs. of coffee), they can be replaced easily. Contact KitchenAid at 1-800-541-6390 to order a set of replacement burrs.

To replace the burrs:

1.Remove the faceplate and burr-shaft assemblies. For instructions, see “Cleaning the Cutting Burrs” steps 1, 2, and 3 on pages 25 and 26.

2.With a Phillips screwdriver, remove the burr from the burr-shaft assembly by turning the two burr-mounting screws counter-clockwise until free.

3.Remove the burr from the motor housing by turning the two burr- mounting screws counter-clockwise until free.

4.Attach the replacement burrs to the burr-shaft assembly and motor housing using the burr-mounting screws. Make certain the cutting surfaces of the burrs face outward, and the burr-mounting screws are tight.

5.Insert the burr-shaft assembly into the motor housing and attach the faceplate assembly. For instructions, see “Cleaning the Cutting Burrs” steps 5 – 10 on pages 27 and 28.

CARE AND CLEANING

29

Image 30

KitchenAid KPCG100 manual Replacing the Cutting Burrs, To replace the burrs

Contents

GUIDE TO P R O L I N E S E R I E SPROFESSIONAL RESULTSBURR COFFEE MILL KPCG100MODEL Section ContentsPage CARE AND CLEANING TABLE OF CONTENTSFEATURES AND OPERATION INTRODUCTIONArranging for Service After the Warranty Expires WARRANTY AND SERVICE INFORMATIONTABLE OF CONTENTS Warranty for Puerto RicoPROOF OF PURCHASE PRODUCT REGISTRATIONSerial Number Date Purchased Store Name and others COFFEE MILL SAFETYYour safety and the safety of others are very important the word “DANGER” or “WARNING.” These words meanIMPORTANT SAFEGUARDS SAVE THESE INSTRUCTIONSELECTRICAL REQUIREMENTS Volts 120 V.A.C. only Hertz 60 Hz NOTE ThisFeatures and Operation Section Contents FEATURESOPERATION FEATURESEST AND OPERATIONPETIBURR COFFEE MILL FEATURES MODEL KPCG100Model KPCG100 Burr Coffee Mill Bean Hopper Motor HousingOn/Off Switch Coffee BinBurr Cleaning Brush Faceplate Assembly ScrewsPower Cord with Tie Precision Stainless Steel Cutting BurrsBefore First Use USING THE PRO LINE SERIESBURR COFFEE MILL Operating the Coffee MillUSING THE PRO LINE SERIES Electrical Shock Hazard Plug into a grounded 3 prong outletDo not remove ground prong Do not use an adapter BURR COFFEE MILL7. To grind coffee, flip the On/Off Switch to the “On” position FEATURES AND OPERATIONAdjusting the Cutting Burrs ADJUSTING THE CUTTING BURRSGrind Setting Table SettingThe white grind control gear Continued…Adjusting to Provide Coarser Grinds ADJUSTING THE CUTTING BURRSBURR COFFEE MILL TIPS PRO LINE SERIESContinued… Clean the coffee bin and cutting burrs frequently BURR COFFEE MILL TIPSPRO LINE SERIES HOW THE GRIND AFFECTS FLAVOR Continued…Page Care and Cleaning CLEANINGCARE Section ContentsCARE AND CLEANING Cleaning the Motor Housing and HoppersCleaning the Cutting Burrs Continued…CARE AND CLEANING Burr-Shaft Assembly Faceplate Assembly5. After cleaning, tilt the grinder backward so the front of the motor housing faces upward Continued…Adjusting The Cutting Burrs For Wear CARE AND CLEANINGReplacing the Cutting Burrs To replace the burrsIf the mill runs when switched on, but coffee does not grind TROUBLESHOOTINGIf the mill does not run when switched on If the mill is operating normally, but stops abruptlyWarranty Information WARRANTY AND SERVICEINFORMATION Section ContentsFOR THE 50 UNITED STATES COFFEE MILL WARRANTYLength of Warranty AND DISTRICT OF COLUMBIAWARRANTY FOR PUERTO RICO COFFEE MILLORDERING ACCESSORIES AND HASSLE-FREE REPLACEMENTREPLACEMENT PARTS ARRANGING FORTHE 50 UNITED STATES ARRANGING FOR SERVICE AFTER THE WARRANTY EXPIRESARRANGING FOR SERVICE OUTSIDE AND PUERTO RICOPage Specifications subject to change without notice FOR THE WAY IT’S MADEdZw703