501974402003_UK
12 Changing and setting the menu parameters
The following menu parameters and functions can be changed by the user:
•Clock
•
•Descaling process
•Coffee temperature
•Length of time the appliance remains on
•Water hardness Factory default values
12.1 Setting the clock
To set the clock, proceed as follows:
• Press the | (the light over the button comes on) then press the | button repeatedly until the |
appliance displays |
| |
CLOCK 00:00
•Press the 
button to set the clock. (If you hold the 
, button down, the time is changed rapidly).
•Press the 
button to confirm the value;
• Press the | button to exit programming mode or | to change other parameters. |
When the appliance is in
12.2 Setting auto-start time
This enables you to set automatic start times.
• Make sure the clock on the appliance is set as described above.
• Press the | button then press the |
| button repeatedly until the appliance displays: |
START TIME 00:00
•Press the 
button to set the 
, button down, the time is changed rapidly).
•Press the 
button to confirm the value,
•Press 
once and the appliance displays the message:
AUTO-START NO
Press the 
button to modify the function (the appliance displays
• Press the 
button to activate
• Press the | button to exit programming mode or the | button to change other parameters. |
12.3 Descaling
Over time, the continuous heating up of the water used to make the coffee leads to lime scale building up in the inner circuits of the appliance.
When the appliance displays the message:
DESCALE
you should perform the descale cycle. Proceed as follows:
• make sure the appliance is ready.
• press the | button (the light over the button comes on) then press the | button repeatedly |
until the appliance displays: |
| |
DESCALE NO
• Press 
and the appliance displays the message:
DESCALE YES
• Press the 
button to start the descale programme.
20
