• After removing the packaging, make sure the
product is complete and undamaged. If in
doubt, do not use the appliance and contact a
qualified professional.
• Installation must be carried out by a qualified
techncian and in compliance with current
regulations.
• Packing elements (plastic bags, polystyrene etc)
must not be left within reach of children as they
may represent a hazard.
• Never install the appliance in environments
where the temperature may reach 0°C or lower
(the appliance may be damaged if the water
freezes).
• Make sure the mains voltage corresponds to the
voltage indicated on the appliance rating plate.
Connect the appliance to an efficiently earthed
socket with a minimum current rating of 10A
only. The manufacturer may not be considered
liable for possible incidents caused by the failure
to adequately earth the mains.
• If the power socket does not match the plug on
the appliance, have the socket replaced with a
suitable type by a qualified professional.
• Observance of safety directives requires that a
multi pole switch with a minimum contact gap
of 3 mm be used for the installation.
• Do not use multiple plug adapters or extension
leads.
• The power cable on this appliance must not be
replaced by the user as this operation requires
the use of special tools. If the cable is damaged
or requires replacing, contact an authorised
service centre only to avoid all risks.
For the electrical connection use a H05 VV-F
type cable as indicated in the table below:
• You should personalise water hardness as soon
as possible following the instructions in
paragraph 12.6.
• The appliance's DATA PLATE is positioned on
the side of the coffee maker so that it remains
visible after installation when the machine is
removed from its housing.
To learn how to operate the appliance correctly,
when you use it for the first time, follow the step-
by-step instructions given in the following chapters.
3 Before first use
11
Conductors Amount x Size
220-240 V ~ + ~ 3 x 1.0 mm2
501974402003_UK 8-10-2007 13:47 Pagina 11