KitchenAid Slide-out Vent Hood Non-vented recirculating Kit, Part No must be used

Models: Slide-out Vent Hood

1 22
Download 22 pages 25.23 Kb
Page 5
Image 5

Installation steps

1. If possible, disconnect and carefully move freestanding range from cabinet opening to provide easier access to upper cabinet and rear wall. Put a thick, protective covering over cooktop, set-in range or countertop to protect from damage or dirt.

2. Determine which venting method [roof, wall, or non-vented (recirculating)] you wish to use.

centerline

wood filler strips

5. If cabinet bottom is recessed above a support frame, wood filler strips need to be installed on the right and left sides of cutout to provide clearance for sliding glass screen. Wood filler strips should be flush with or recessed 1/16" – 1/8"

(1.6 mm – 3.2 mm) from the bottom of the support frame.

4"

10-3/4"

(10.2 cm)

(27.3 cm)

cutout

1"

 

(25.4 mm)

centerline

 

10-3/4"

(27.3 cm)

A B

cutout

centerline

Transfer measurement “A” and ”B” to the cabinet backwall. Measure from the underside of cabinet or wood filler strips if used. Mark the cutout as shown. Use a saber saw or keyhole saw to cut a rectangular opening for vent.

grille

centerline

3. Determine and clearly mark a centerline on the underside of the cabinet.

1-1/2"

(3.8 cm)

9-3/16"

(23.3 cm)

30" (76.2 cm) hood – 13-1/16" (33.2 cm) 36" (91.4 cm) hood – 16-1/16" (40.8 cm)

The finished cutout size will be — 30" (76.2 cm) hood:

9-13/16" x 26-1/8" (23.3 cm x 66.4 cm) 36" (91.4 cm) hood:

9-13/16" x 32-1/8" (23.3 cm x 81.6 cm)

4. Measure and mark lines as shown for your size of vent hood. Use a saber saw or keyhole saw to cut opening through underside of cabinet.

6A. To vent outside through the roof with 3-1/4" x 10" (8.3 cm x 25 cm) rectangular vent, measure and mark lines as shown. Use a saber saw or keyhole saw to cut a rectangular opening for the vent.

B

A

6B. To vent outside through the wall with 3-1/4" x 10" (8.3 cm x 25 cm) rectangular vent, assemble vent you will use over vent opening. Do Not attach vent at this time. Measure from the top of the glass screen housing to top of vent opening (dim. “A”) and back to bottom of vent opening (dim “B”). Remove vent.

6C. To vent inside through the soffit with 3-1/4" x 10" (8.3 cm x 25 cm) rectangular vent, measure and mark a rectangular vent opening in the soffit using the method shown in step 6B. Measure and mark the same centerline on the soffit above the vent hood area. Use the grille from the Non-vented (recirculating) Kit or other grille as a template to outline opening for vent. Use a saber saw or keyhole saw to cut a rectangular opening for the vent system.

The hood can be vented inside through the top of the cabinet. Do not terminate vent into a dead air space.

The Non-vented (recirculating) Kit, Part No. 883140 must be used.

7. Install vent system according to method needed. Use caulking to seal exterior wall or roof opening.

5

Page 5
Image 5
KitchenAid Slide-out Vent Hood installation instructions Non-vented recirculating Kit, Part No must be used

Slide-out Vent Hood specifications

The KitchenAid Slide-out Vent Hood offers an innovative solution to maintaining a clean and comfortable kitchen environment. Designed to seamlessly blend into cabinetry, this vent hood provides functionality without compromising aesthetics. Its slide-out feature allows for easy access and efficient ventilation whenever cooking activities heat up, and it can be conveniently tucked away when not in use, preserving the sleek lines of your kitchen design.

One of the main features of the KitchenAid Slide-out Vent Hood is its powerful ventilation system, which effectively captures smoke, steam, and odors, ensuring that your kitchen remains fresh and free from airborne particles. With multiple fan speeds, users can easily adjust the airflow according to their cooking needs. The high-performance blower efficiently moves air, making it suitable for various cooking methods, from gentle simmering to high-heat frying.

In addition to its robust ventilation, this slide-out vent hood is equipped with bright, energy-efficient LED lighting. These lights illuminate the cooking surface below, enhancing visibility and ensuring that every culinary task is well-lit. The LEDs are not only long-lasting but also consume less energy, helping to reduce electricity bills while providing excellent illumination.

The KitchenAid Slide-out Vent Hood features a stainless steel construction, which is not only durable but also adds a modern touch to any kitchen decor. Its easy-to-clean design means that maintenance doesn’t become a chore; simply wipe down the surfaces to keep it looking new.

Another significant characteristic of this vent hood is its integrated grease filters, which are designed to capture and collect grease and other particles effectively. These filters are dishwasher-safe, making them convenient to clean and maintain, allowing for a more hygienic cooking environment.

Moreover, the KitchenAid Slide-out Vent Hood integrates seamlessly with other KitchenAid appliances, creating a cohesive look and feel within your kitchen. With options for customizable sizes and configurations, it can fit perfectly into a variety of kitchen layouts.

In summary, the KitchenAid Slide-out Vent Hood combines style, power, and convenience, making it an essential appliance for any home chef. Its advanced features, modern design, and user-friendly technologies elevate the kitchen experience, ensuring that cooking remains a pleasure rather than a chore.