Exterior surfaces
Clean the vent hood with a mild detergent and soft cloth. Do Not use abrasive cleansers or steel wool pads.
Filters
For best results, clean filters often. Pull tabs downward to remove filters. Place filters in dishwasher or hot sudsy water to clean.
Replacing the bulb
KWVU and YKWVU model series:
screws
GZ and YGZ model series:
screws
1.Remove screws above light cover and set aside.
2.Pull light cover forward slightly and then downward to remove cover.
3.Replace light bulb. Use a
(76.2 cm) unit and
4.Lift cover back into position. Replace screws.
Operating of vent hood
For best results, turn vent hood fan on at beginning of cooking and allow it to run until all smoke and odors are removed from room.
KWVU and YKWVU model series:
light button |
| speed buttons | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
To turn fan ON:
Slide glass shelf forward. Press the fan “speed” button for the desired speed. Speed may be increased, decreased, or turned off anytime during vent hood operation. The indicator light next to “speed” button selected should be on when the fan is running.
To turn fan OFF:
Press the “0” button or close the glass shelf. The fan will shut off when glass shelf is about 2"
(5.1 cm) from the closed position. When the glass shelf is opened, the fan will operate at the last setting.
To turn vent hood light ON:
Open the glass shelf about 1"
(2.5 cm). Press the “light” button. The light will be on each time the glass shelf is opened. The light can be used for a night light by opening the glass shelf about 1" (2.5 cm).
To turn vent hood light OFF:
Press the “light” button to turn the light off. Or close the glass shelf.
GZ and YGZ model series:
light switch | fan switch |
| indicator |
| light |
| speed |
| switch |
To turn fan ON:
Slide glass shelf forward. Move the “fan” switch to “1”. Move the “speed” switch to desired setting. The speed may be increased, decreased, or turned off anytime during vent hood operation. The “indicator” light should be on when the fan is running.
To turn fan OFF:
Move the “fan” switch to “0” or close the glass shelf. The fan will shut off when glass shelf is about 2" (5.1 cm) from the closed position. When the glass shelf is opened, the fan will operate at the last settings.
To turn vent hood light ON:
Open the glass shelf about 1"
(2.5 cm). Move the “light” switch to the “1” position. The light will be on each time the glass shelf is opened. The light can be used for a night light by opening the glass shelf about 1" (2.5 cm).
To turn vent hood light OFF:
Move the “light” switch to the “0” position. Or close the glass shelf.
Accessories
available from your dealer
Note: Instructions are included with each kit.
Front trim kit – matches the front panel color to range or cooktop color.
For 30" (76.2 cm) model series | For 30" (76.2 cm) model series | |
KWVU205 & YKWVU205: | GZ7730 & YGZ7730: | |
Part No. 4360201 (white) | Part No. 4396067 (white) | |
Part No. 4360203 (black) | Part No. 4396066 (black) | |
Part No. 4392855 | (biscuit) | Part No. 8171368 (biscuit) |
For 36" (91.4 cm) model series |
| |
KWVU265 & YKWVU265: : | For 36" (91.4 cm) model series | |
Part No. 4360202 | (white) | GZ7736 & YGZ7736: : |
Part No. 4360204 | (black) | Part No. 4396069 (white) |
Part No. 4392856 | (biscuit) | Part No. 4396068 (black) |
|
| Part No. 8171369 (biscuit) |
Part No. 883140 – fits all models
9
