KitchenAid W10216167A installation instructions Connect Water Supply Line and Drain Hoses

Models: W10216167A

1 50
Download 50 pages 40.37 Kb
Page 10
Image 10
Option 1: Right-hand side utility access

Option 1: Right-hand side utility access

For right-hand routing, drain hoses are shipped in the correct position. Place the water supply line in the clip as shown.

Slide dishwasher partway into the cabinet opening. Allow for access to the electrical terminal box.

Option 2: Left-hand side utility access

For left-hand routing, remove drain hoses from the clips in the rear bracket as shown.

Connect Water Supply Line and Drain

Hoses

1.Connect water supply line to the water valve under the sink.

Option 2: Left-hand side utility accessConnect Water Supply Line and DrainA

Route water supply line and drain hoses into the cabinet.

A. Hot water supply

2.Slide clamps onto drain hoses (Figure A). Do not cut drain hoses.

3.Push hoses into Y drain connector until fully seated (Figure B). Several “clicks” will be heard.

4.Slide clamps into position (figures C and D).

A

B

C

D

10

Page 10
Image 10
KitchenAid W10216167A Connect Water Supply Line and Drain Hoses, Option 1 Right-hand side utility access