AIRPLAY NETWORK SETUP
The Klipsch
To perform this setup, your PC or Mac must have wireless
AIRPLAY NETWORK SETUP STEPS
(You MUST know your home wireless network Name (SSID) and Password to perform the setup)
1.Disconnect the internet cable from your computer (if one is connected) Plug in the
2.To access the
3.Open the Wireless Connection Utility on your PC or Mac to look for available networks. Klipsch
4.Open your Internet browser (Internet Explorer®, Firefox®, Safari®, etc.) and type in the IP address: http://192.168.1.12 in the address bar and hit “Enter” (Figure 2), go to Step 5.
5.Once you have entered the IP address, a setup screen from the Klipsch
6.Go to the “Airplay Wireless LAN Settings” area of the screen and select your wireless network from the drop down box next to “Service Set ID (SSID)” or select to enter it manually if you do not see it or it is not being broadcast (Figure 4), go to Step 7.
7.Once you select your wireless network, you will be prompted to enter the password for your wireless network if one is required, go to Step 8
8.Once you have entered your password click “Apply”, a screen will appear stating “Warning, incorrect parameters about to change settings” (wording varies depending on use of Internet Explorer, Firefox, Safari, etc.). Click OK, go to Step 9.
9.Your
10.
You have now connected your Klipsch
FIGURE 1
Apple Wireless Connections
Windows Wireless Connections
FIGURE 2
FIGURE 3
FIGURE 4