24
7.Install the new lamp housing and tighten the screws.
8.Replace the lamp door.
9. Replace the base or ceiling mount plate, if necessary. | Service menu |
10.Plug in the power cord and press the Power button on the remote to turn the projector back on.
11.To reset the lamp hour timer, navigate to the Settings>Service menu and select Reset Lamp Hours. See page 22 for details.
Remote control discrete codes
You can use these codes to program another remote to learn the projector’s remote functions. To activate discrete mode, press and hold the Custom button on the remote for 10 seconds. The backlight blinks twice when discrete mode is entered. The remote buttons are now remapped to new functions as listed below. To return to normal remote mode, press and hold the Custom button on the remote for 10 seconds. The remote also returns to normal mode automatically if no activity is detected for two minutes.
Table 5: Remote control discrete codes |
| |
|
|
|
Function | Description | Remote Button |
Power off | Turns power off | Navigates up |
Power on | Turns power on | Navigates down |
Native resize | Selects Native resize | Resize |
16:9 resize | Selects 16:9 resize | Overscan |
4:3 resize | Selects 4:3 resize | Source |
Letterbox resize | Selects letterbox resize | Custom |
Natural wide resize | Selects natural wide resize | Auto image |
User preset 1 | Selects users preset 1 | Source 1 |
User preset 2 | Selects user preset 2 | Source 2 |
User preset 3 | Selects user preset 3 | Source 3 |
Projector dimensions for ceiling mount installations
All values in millimeters (mm).
