Knoll Systems HD225 user manual Displaying a video image, ? No startup screen? Get help on page

9

Displaying a video image

Remove the lens cap.

Press the Power button on the top of the projector or the remote.

The fans start to run. When the lamp comes on, the startup screen is displayed. It can take a minute for the image to achieve full brightness.

? No startup screen? Get help on page 11.

Plug in and turn on the video device.

The video device’s image should appear on the projection screen. If it doesn’t, press the Source button on the keypad or remote.

Adjust the height of the projector by pressing the release button to extend the elevator foot. Rotate the leveling foot, if necessary.

Position the projector the desired distance from the screen at a 90-degree angle to the screen. See 26 for a table listing screen sizes and distances to the screen.

Adjust the zoom or focus rings by rotating them until the desired image size and focus are produced.