2.2 Installing the Bay Cat X Wall Bracket
The Bay Cat X hangs on its wall bracket in either landscape or portrait orientation.
Installing the wall bracket
The wall bracket comes with each Bay Cat X. See pic- ture in “You Should Have These Accessories” on page 3.
Using hardware you supply, bolt or screw the wall bracket to a wall. Be sure to bolt or screw to structural ele- ments of the wall, not just the wall board or drywall. The Bay Cat X weighs 73 lbs. (33 kg). The mounting method you use must be capable of holding five times this weight (356 lbs., 160 kg). The mounting holes are on 6.26" cen- ters. When installed, the wall bracket protrudes 0.375" from the back panel of the Bay Cat X.
✎This space at the rear of the Bay Cat X will be occupied by the wall bracket when the display is hanging on a wall.
For array mounting guidelines, contact Clarity Visual Systems.
Ventilation
The Bay Cat X needs no space to the rear for ventilation. However, like all electronic devices, it does produce some heat. The space above the display should provide enough space so that heated air can get away. This means you should not mount it into a sealed space with nowhere for the heated air to escape.
Portrait or Landscape
The wall bracket always mounts the same way, whether the displays will be hung as portrait or landscape. The hooks on the wall bracket should always have the open part facing upward.
✎The Locking Wall Bracket does not have the large back plate. It consists of the square, open box with the locking mechanism. This Locking Wall Bracket with CATLOCK™ is a standard accessory.
9
