Backlight Control Menu Options
Menu Item | Description | Setting(s) |
|
|
|
Auto Backlight on | Auto Backlight turns on the backlight soon after AC power is restored. |
|
|
|
|
Turn Backlight off with | Saves lamp life and energy by turning off backlights |
|
no Source (DPMS) |
|
|
|
|
|
DPMS Delay | The amount of time the unit will wait after a source is removed, before it turns off | 0 mins - 1 hr |
| the backlights. |
|
|
|
|
Backlight Control | The method by which the backlight intensity is adjusted. Auto mode adjusts the | Auto, Manual |
Mode | light levels using a threshold and a light intensity sensor. Manual mode allows |
|
| the user to set the backlight intensity manually. |
|
|
|
|
When Backlight Control Mode is set to Manual: |
| |
|
|
|
Backlight Intensity | Backlight Intensity can be controlled when Backlight Control Mode is Manual. In | |
| Auto mode, Backlight Intensity is read only. |
|
|
|
|
When Backlight Control Mode is set to Auto |
| |
|
|
|
Ambient Light | Ambient Light is the light currently in the immediate area of the Bay Cat X |
|
|
|
|
Ambient Threshold | Ambient Threshold is the light intensity below which the backlights go to the Low |
|
| Intensity setting. |
|
|
|
|
Low Intensity | Low Intensity is the backlight level (as a percent of maximum) the light will go to | |
| when the ambient light falls below the Ambient Threshold. There is a |
|
| minute delay before the low intensity takes effect. This keeps the backlight from |
|
| flashing between low and high intensity if the ambient light is hovering near the |
|
| threshold value. |
|
|
|
|
97