Clarity SN-4620-1080 manual Quick Start, Quick start, Base Video Broadcast, Picture

3.1 Quick Start

After you select the picture source, most of the rest of setup is automatic, although you can override the automatic settings and adjust anything manually.

Selecting the source means choosing the connector where the picture is coming in. You’ll chose from the following connectors, depending on the model:

Base	Video	Broadcast
Analog	Analog	Analog
	DVI	SDI
	Composite	Composite
	S-Video	S-Video
	Component (YPbPr)	Component (YPbPr)

Quick start

Connect power and turn on the power switch, which should light. The backlight (lamp) will come on automatically. If the power was already on, and the backlight is off, press the remote ON button.

1.Aim the remote control at the lower right corner (in landscape mode; in portrait mode, it is in the lower left corner of the Bay Cat X) and press SOURCE on the remote.

The Bay Cat X looks at each of the connectors and stops on the first one that is receiving a valid picture. If this is successful (it may take 10 seconds) stop here. If you have several sources connected, press SOURCE again to go to the next one with a picture.

If you get no picture or have other trouble, read the rest of these steps.

✎If you use a video source (such as from a progressive DVD player) on the Analog or Digital inputs, manually change the Colorspace to YPbPr. Otherwise the colors will be wrong.

2. Press MENU. The Main Menu displays on the screen

w

Main Menu

Picture

Size & Position

Aspect Ratio & Wall

Memory

Diagnostics

Advanced Options“

Program Information

3.Select Picture with the up-down arrow keys on the remote and press ENTER. This opens the Picture menu.

Picture

Source			Analog
Colorspace			RGB
Sync Type	Separate H&V
Vertical Frequency (frame locked)			60Hz
Horizontal Frequency		50.00kHz
Pixel Frequency		80.10MHz
Horizontal Resolution		1366
Vertical Resolution		768
Frequency			1602
Phase			22.5°
Sharpness		Sharpest
Input Levels

20