2.3Hanging the Bay Cat X on the Wall Bracket
The locking system for the Bay Cat X wall bracket prevents the display from jumping off the bracket during earth tremors, and it helps deter theft.
Two-person job
The Bay Cat X weighs just over 73 lbs. (33 kg). Always have two persons hang the display on the wall bracket.
Two orientations
The Bay Cat X hangs in either landscape or portrait ori- entation. The small black square shows the position of the AC power receptacle. The gray rectangle shows the posi- tion of the picture connectors, when viewed from the front.
4.Use the locking tool to lock the display onto the wall bracket. To see if it is locked in place, try to lift the dis- play. If it won’t lift, its locked.
Landscape
Portrait
Locking and unlocking
✎The Bay Cat X will not rotate the picture. The source (computer or video source) must rotate the picture. The Bay Cat X can rotate the menus, so the internal menus will be upright with either orientation.
Hanging the display
Before you hang the first display, practice using the lock lever to open and close the locking mechanism.
✎After the display is hung, the connectors for video and power are a little difficult to see. Some installers connect power and video cables just before hanging the display.
1.Be sure the locking lever is in the open position. The tab on the lever should not protrude below the bottom of the box.
2.Using two persons, lift the display so the power recep- tacle is at the bottom for landscape hanging.
✎For portrait orientation, the power receptacle will be on the left, looking from the front.
3.Hang the display in the hooks. Pull forward on the dis- play to see that it is properly in the hooks.
This end of the locking tool works from below the wall bracket.
This end of the locking tool works from the sides of the wall bracket.
10
