| Unit Status Settings |
Setting | Description |
|
|
Asset Tag | An optional user settable field which is set via the |
| ber, name or any other piece of information desired |
|
|
Backlight Status | Shows OK if the electronics module detects that both banks of backlights are functioning |
| normally. Shows Failed if one or both of the backlight banks is not drawing the correct |
| amount of current |
|
|
Internal Temperature | The current internal temperature at one point on the electronic module. This is not neces- |
| sarily the highest nor the lowest temperature point of the unit, nor is it an indicator of ambi- |
| ent temperatures. |
| If thermal guidelines (see “Normal Use Thermal Guidelines” on page 116) are exceeded |
| and additional ventilation or cooling has been implemented, this temperature may be used |
| as a datapoint to determine if the temperature of the unit is being affected. |
|
|
Mode ID | The index into the internal mode table found for the incoming signal. This is used in diagno- |
| sis of mode detection problems |
|
|
HPer | The measured horizontal period of the incoming signal. This is used in diagnosis of mode |
| detection problems |
|
|
VLines | The number of horizontal lines detected per vertical period. This is used in diagnosis of |
| mode detection problems |
|
|
85
