Clarity SN-4620-1080 manual Color Balance Settings, Menu Item Description Settings

Color Balance Settings

Menu Item	Description	Setting(s)
Color Temperature	Adjust the “pure white” of the system to different color	3200°K (Warm), 5500°K, 6500ºK,
	shades	8500°K (Cool)
White Balance - All	Adjusts the white balance setting of all three colors	Clipboard
	simultaneously, keeping them in proportion to each
	other, thus keeping the color the same, and adjusting the
	brightness of white to match other units in an array.
Red	Adjusts each of the colors separately, allowing the user	0-100
	to change the color of white to match other units in an
Green
	array.
Blue
Gray Balance - All	Adjusts the gamma setting of all three colors simulta-
	neously, allowing the user to change the brightness of
	gray to match other units in an array
Red	Adjusts the gamma of each of the colors separately,	0-15
	allowing the user to change the color of gray to match
Green
	other units in an array
Blue
Test Pattern	The four test patterns are the same patterns available	Off, White, Gray, Grayscale, Colors
	from Main > Diagnostics > Test Patterns but are more
	conveniently accessed from this menu when you are
	using the remote to color balance units.
Hide Menu	Use Hide Menu to quickly hide the on-screen menu while you are doing color balancing using a
	remote
Copy to Clipboard	To compare settings, you can save to the clipboard or recall from the clipboard a range of settings.
	This can dramatically speed up the process of performing color balancing. For more information
Recall From Clip-
	on color balancing an array of units, see “Adjusting Color Balance” on page 46.
board
Reset to Defaults	Reset all the settings to the factory defaults.

93