Kobe Range Hoods CH2748SQB, CH2730SQB Maintenance, Cleaning Hood Surface, Safety Warning

Models: CH2742SQB CH2736SQB CH2748SQB CH2730SQB

1 102
Download 102 pages 46.98 Kb
Page 21
Image 21
MAINTENANCE

MAINTENANCE

Cleaning Hood SurfaceSAFETY WARNING

NEVER PUT YOUR HAND INTO AREA HOUSING THE FAN WHILE THE FAN IS OPERATING.

Cleaning Hood Surface

Manual backgroundCAUTION: NEVER USE ABRASIVE CLEANERS, PADS, OR CLOTHS. DO NOT USE PAPER TOWEL ON STAINLESS STEEL.

For optimal operation, clean range hood and all baffle/spacer/filter/oil tunnel/oil container regularly.

***Regular care will help preserve the appearance of the hood.

1.Use only mild soap or detergent solutions. Dry surfaces using soft cloth. DO NOT USE PAPER TOWELS.

2.If hood looks splotchy (stainless steel hood), use a stainless steel cleaner to clean the surface of the hood. Avoid getting cleaning solution onto or into the control panel. Follow directions of the stainless steel cleaner. Caution: Do not leave on too long as this may cause damage to hood finish. Use soft towel to wipe off the cleaning solution, gently rub off any stubborn spots. Use dry soft towel to dry the hood.

3.DO NOT allow deposits to accumulate or remain on the hood.

4.DO NOT use ordinary steel wool or steel brushes. Small bits of steel may adhere to the surface and cause rusting.

5.DO NOT allow salt solutions, disinfectants, bleaches, or cleaning compounds to remain in contact with stainless steel for extended periods. Many of these compounds contain chemicals, which may be harmful. Rinse with water after exposure and wipe dry with a clean lint free cloth.

To Clean Safety Screens and Impellers

CAUTION: DRAIN OIL CONTAINER BEFORE OIL CAN OVERFLOW.

1)Normal Cleaning

-Spray a mild degreaser into the fan and turn on high speed. Liquid residue will accumulate in the oil containers.

2)Cleaning Safety Screens

-Remove the safety screen screw and slide the safety screen out.

-Wash with warm soapy water. Dry completely before returning into place.

-Top rack dishwasher safe.

To Clean Baffle Filter

CAUTION: DRAIN OIL FROM BAFFLE FILTER BEFORE OIL WILL OVERFLOW.

1.Remove all the baffle filters and oil tunnel.

2.Using a sponge, wash with warm soapy water. Dry completely before returning into place. (Note: Baffle Filters are top rack dishwasher safe.)

19

Page 21
Image 21
Kobe Range Hoods CH2748SQB, CH2730SQB, CH2736SQB, CH2742SQB Maintenance, Cleaning Hood Surface, Safety Warning