Copying
66 www.kodak.com/go/aiosupport
Copying a photo
You can copy a photo using the default settings, or you can make adjustments to the
quantity, size, quality, and brightness of your copies. When you copy a photo, the
printer will use paper from the top paper tray, unless you specify otherwise.

Using the default settings to copy a photo

The default settings are either the factory default settings (see Resetting factory
defaults, page 115), or defaults that you have set on the printer (see Save as Default
at the bottom of the table under Adjusting the settings and copying a photo,
page 67).
1. Lift the scanner lid, and place the photo face down in the right-front corner of
the scanner glass.
IMPORTANT: Do not load photos in the Automatic Document Feeder (ADF).
2. Close the lid.
3. Press .
4. Touch Copy Photo.
5. Press to begin copying.