Operating the Printer
Accessing the Printer Press Menu Scroll repeatedly to scroll through the printer settings in the
Settings | following order. |
|
|
|
|
| |
Printer Setting | Operator Panel Display | Action Required | |
|
|
| |
|
|
| |
Printer ready | Ready | None. The printer is on and ready to make prints. | |
|
|
| |
Making a test print | Test Print Mode | Press Enter to enter test print mode. See “Making a test | |
|
| print”. | |
|
|
| |
Check remaining | Remain = XXX/YYY | None. XXX represents the number of prints remaining out | |
media |
| of the total possible (YYY) for the media currently | |
|
| installed. | |
|
|
| |
Checking the printer | Printed = XXXXX | None. XXXXX represents the total number of prints made | |
total print count |
| since the printer was manufactured. This counter cannot | |
|
| be reset. | |
|
|
| |
Checking the FEE | FEE Firm X.XX | None. The printer FEE firmware version is displayed. | |
firmware version |
|
|
|
|
|
| |
Checking the DSP | DSP Firm X.XX | None. The printer DSP firmware version is displayed. | |
firmware version |
|
|
|
|
|
| |
Checking the engine | ENG Firm X.XX | None. The engine firmware version is displayed. | |
firmware version |
|
|
|
|
|
|
|
Setting the operator | Language | 1. | Press Enter. |
control panel (OCP) |
| 2. | Select the language. |
language |
|
|
|
|
|
|
|
Setting the standby | Standby Timeout | 1. | Press Enter. |
timeout |
| 2. | Select the standby timeout (Never, 30 minutes, 60 |
|
|
| minutes, 120 minutes, 480 minutes). |
|
|
|
|
Setting the level of | Matte Level | 1. | Press Enter. |
matte lamination |
| 2. | Select the level of matte lamination |
|
|
| |
|
|
|
|
