Removing the foam sheet
Scanner components
Front
1Scanner door
2Gap release lever
3Scanner door release
4LEDs
5Paper guides
6Input tray
7Input tray extender
The scanner is packed with a foam sheet inside to protect the rollers during shipping. This foam sheet must be removed before you can begin scanning.
1.Lift the scanner out of the box and place it on a stable, level work surface that is capable of supporting it.
2.Lift up the scanner door release to unlatch and open the scanner door.
3.Remove the foam sheet.
4. Lower the scanner door and press it down firmly until it latches into place.
1
2
3
4
5
67
9 |
