OPERATION INTERFACE
The unit supports two choices of audio output: Analogy audio and digital audio. Analog audio includes stereo 2 channel and
5.1channel. Digital audio includes optical and coaxial output. Digital audio obtains a better effect than analog.
Stereo Output:
Connect with audio output jack for the mixing audio of the unit and the stereo input of TV or amplifier by audio cable.
5.1 channel output:
Connect with 5.1 channel output of the unit and corresponding input of amplifier by audio
5.1channel cable. 
Coaxial output:
Connect the Digital coaxial cable to the coaxial output of the unit and the corresponding input of amplifier.(with digital coaxial inlet)
Optical output:
Connect the Toslink optical cable to the optical output of the unit and the corresponding input of amplifier.(with digital optics inlet). stereo input of TV or amplifier.
Each connection must match to the internal setup of the unit. Please refer to the unit and the connection equipment before connection.
DVD player supplies a wide dynamic range of frequencies so the amplifier volume must be suitable levels or the speakers may be damaged from sudden bursts of high volume sounds.
During the operation, please power off amplifier before power on/off DVD player, the speaker may be damaged.
Setup Before Operation: Before operation, please make sure the following setup is correct.
Audio Output:
The unit has four choices of audio output: 2 channel, digital, 5.1 channel and stereo PCM. Select different setup depending on your connection. For more information, please refer to system setup.
TV System:
Select the corresponding system depending on your TV system. For more information, please refer to system setup.
Video Output:
The unit has three choices of video output: composite video,
Note:
DVD disc can support different scale of pictures. Maybe picture is not full screen or part of picture has been blocked.
The manual refer to English OSD.
C5
