To reduce the risk of fire and electrical shock, do not remove the cover of this unit. Please refer all
servicing difficulties to qualified technicians . This lightning flash arrow symbol in a triangle, is
intended to alert users to the presence of non-insulated high voltage within the product`s enclosure
that may be of sufficient magnitude to constitute a risk of electric shock to person. The exclamation
point symbol in a triangle is intended to alert users to the presence of important operating and
maintenance instructions in the literature accomnying the unit.
LASER PRODUCT - This marking indicates the presence of laser beams used in this unit, and
CLASS 1 refers to laser beams of the weaker class. There is no danger of hazardous radiation
outside this unit.
Read through this instruction manual before installation and use.
To disconnect the power cord, hold the plug instead of pulling on the cord.
Switch off the main power when the unit is not in use. (Disconnect the power plug from the power
outlet when you do not intend to use the unit for a prolonged period of time.) Before moving the
unit, remove the disc from the unit`s tray first.
Do not open the cover or touch any of the components inside the unit.
Do not operate or install the unit under direct sunlight or near objects that radiate heat. This may
lead to overheating of the unit.
Do not operate or install the unit in moist or humid conditions. This may affect the pick-up of the
unit.
IInstall the unit on a flat surface with good air circulation. Please ensure the ventilation holes are
not covered otherwise the unit will overheat and malfunction.
Wipe the panel and case with soft dry cloth only. Do not apply any kind of thinner, alcohol or sprays
when cleaning the unit.
REFER SERVICING ONLY TO QUALIFIED SERVICE PERSONNEL
POINTS FOR ATTENTIONB1
Attention: To reduce the risk of fire and electric shock, do not expose this unit to rain or moisture.
IMPORTANT NOTICE:
CLASS 1
LASER PRODUCT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN