SYSTEM SETUP
Note: Please set up this items in the case of opening disc tray.
DIALOG
When playing the disc, set up this item to adjust voice dialog on, In DOWNMIX 5.1 CHANNEL mode, the function is not available. The reference set up is minimum volume.
LPCM OUTPUT 48K 96K
DYNAMIC
AUDIO SETUP
_ | _ | FULL |
_ | _ | |
_ | _ | 6/8 |
_ | _ | |
_ | _ | 4/8 |
_ | _ | |
_ | _ | 2/8 |
_ | _ | |
_ | _ |
|
_ | _ | OFF |
|
|
|
POST DRC
Enable the item, when system power on, current increases slowly to the speaker, to prevent the speaker from electrical shork. Disable the item, the function is no use. When Automatic, system can setup automatically. The reference set up is on.
SPDIF SETUP PAGE:
SPDIF OUTPUT | SPDIF OFF |
| SPDIF RAW |
| SPDIF/PCM |
| MANUAL |
CD | SPDIF OFF |
| SPDIF RAW |
| SPDIF/PCM |
DOBLY DIGITAL | SPDIF OFF |
| SPDIF RAW |
| SPDIF/PCM |
DTS | SPDIF OFF |
| SPDIF RAW |
| SPDIF/PCM |
MPEG | SPDIF OFF |
| SPDIF RAW |
| SPDIF/PCM |
SPDIF SETUP PAGE
SPDIF OUTPUT
Turn OFF the optical and coaxial output, only analog output. If in manual mode, you can choose different output mode according with different disc. Reference setup is "SPDIF RAW".
CD, DOBLY DIGITAL, DTS, MPEG
When SPDIF output is manual, please setup SPDIF output setup according with CD, DOLBY digital, DTS, MPEG Disc. If no optical output on these four modes, please set up SPDIF output to "SPDIF RAW". Reference setup is
SPDIF RAW.
LPCM OUTPUT
To set up different mode bwtween 48HKz to 96KHz according with different audio signal source.
Note: some amplifier cannot support 96HZ signal, and lead to unnormal sound from optical or coaxial digital output.
The reference setup is 48 KHZ.
DYNAMIC
If watch dynamic scope large movie programmer at night, to select this mode to reduce the volume, meantime keep the little
E3
